Log in

View Full Version : Drivers Window...



Ozark Marauder
12-21-2016, 09:55 AM
Just a quick question, is the window glue bonded or riveted to the window regulator, the rear top of my window comes out of the track about a 1/2 of an inch, on the way up about two to three inches from top close, but sometimes comes back in about 1/4 " otherwise remains at 1/2 inch. Just wondering before I rip into it....

OZ

TORINO
12-21-2016, 10:32 AM
It is riveted from the factory but if it has been apart it could be bolted to the regulator. If a rivet or bolt is lose easy fix other wise best way to fix is to change motor and regulator as one. Taking the old motor off the regulator many times does not go well. the spring in the regulator likes to fly apart.

Gerry24
12-21-2016, 11:01 AM
What ^^^^^^^said.

fastblackmerc
12-21-2016, 01:51 PM
The regulator and windows are riveted. The rivets are easy to remove. I replace them with SS 1/4-20 bolts, washers and Nyloc nuts. Just have to snug the window to regulator ones. If you tighten them too tight you'll have to get another window.

Ozark Marauder
12-25-2016, 05:01 AM
Thanks for the info, something to do on a warm day...