Looking for pin out

[mm svt]

I've found a couple pin out diagrams of the transmission selector but the wire colors don't match the MM.

https://uploads.tapatalk-cdn.com/20170421/004af6f3bcaa9e254c303cec852424 51.jpg

Any help here would be greatly appreciated

[fastblackmerc]

Of course they don't match.... a 2000 Explorer is a long way from a Marauder.

If I remember I'll look it up in the Marauder wiring manual when I get home.

[the fat bastid]

https://www.mercurymarauder.net/forums/attachment.php?attachmentid=45 831&stc=1&d=1492795721

Would this help?
DDDAMN YOU COMPRESSION!
What is your e-mail?

[mm svt]

https://www.mercurymarauder.net/forums/attachment.php?attachmentid=45 831&stc=1&d=1492795721

Would this help?
DDDAMN YOU COMPRESSION!
What is your e-mail?



m.v.turk@att.net

[mm svt]

Actually just what I posted but for the MM

[mm svt]

I was really hoping the pins would be the same just diff wires but the Marauder plugs has additional blank pins

[justbob]

Wiring up the neutral safety, reverse lock out, back up lamps, and speedo was the simplest thing I encountered doing mine.

The only two wires I remember entering the cabin were for the neutral safety. I believe all others tied right into the auto trans harness.

I recall putting it off till last and laughing at myself an hour later when the final loom was getting wrapped!

Having a manual harness is going to be really easy to splice in. I had to order all the connectors.

The one thing I never looked into was the cruise control off at the press of the clutch. Maybe someday..


Sent from my iPhone using Tapatalk

[mm svt]

Wiring up the neutral safety, reverse lock out, back up lamps, and speedo was the simplest thing I encountered doing mine.

The only two wires I remember entering the cabin were for the neutral safety. I believe all others tied right into the auto trans harness.

I recall putting it off till last and laughing at myself an hour later when the final loom was getting wrapped!

Having a manual harness is going to be really easy to splice in. I had to order all the connectors.

The one thing I never looked into was the cruise control off at the press of the clutch. Maybe someday..


Sent from my iPhone using Tapatalk



Yes, all the plugs are done, even the the cruise control disengagement from the clutch, just looking to confirm which pin location neutral is

[justbob]

I believe it's pin 6 WH/BK


Sent from my iPhone using Tapatalk

[mm svt]

Ok I after moving the trans selector and using a ohm meter neutral and park tend to show continuity through the white and pink and goes away in reverse and drive

[gdmjoe]

For your (future) listening pleasure and reading enjoyment .....
Search Wiring Diagrams... (http://www.revbase.com/BBBMotor/Wd) ««« -click-

[justbob]

Ok I after moving the trans selector and using a ohm meter neutral and park tend to show continuity through the white and pink and goes away in reverse and drive



I misspelled. Sorry WH/PK is indeed voltage to starter solenoid.


Sent from my iPhone using Tapatalk

[mm svt]

For your (future) listening pleasure and reading enjoyment .....
Search Wiring Diagrams... (http://www.revbase.com/BBBMotor/Wd) ««« -click-



This helped, Thanks so much.

And it was the white and pink, starter circuit was pin 10 to pin 12, pin 9 and 11 for reverse lamps

Thanks again everyone