M122 build

[poohc1979]

Try and do an M122 build on my MM 03


Sent from my iPhone using Tapatalk

[Comin' in Hot]

Need more info.

[RubberCtyRauder]

need more info, stock motor wont handle a m122 for long.

[poohc1979]

What all information you need


Sent from my iPhone using Tapatalk

[RubberCtyRauder]

do you have a built motor? are you planning one?, who is doing the install, do you have any idea what parts you need? budget?

[poohc1979]

Yes I have the motor I'm trying to get all parts for the supercharger no eaton swap I wanna to keep it to the right side not the left side I see they have aftermarket plate for it now


Sent from my iPhone using Tapatalk

[RubberCtyRauder]

an m122 is still an eaton. Hp goals? track use? daily usae? going to upgrades front brakes? driveline? trans?

[poohc1979]

I am a mechanic so I'm doing the work


Sent from my iPhone using Tapatalk

[Seneca]

Be prepared to possibly needing a cowl hood, I'm in the process of a similar build, m122 forged engine keeping mine under 500rwhp.. preferably 480ish I have the m122 setting into the lower intake and it already looks questionable for height, I believe the spacer is about 3/4in I tried to post a picture accept I'm beyond my allowance

[RubberCtyRauder]

`ebay, svt performance, corral.net for parts, Nobody here has completed a m122 swap just yet, but as listed, Seneca is in the process

[poohc1979]

Is trilogy parts still available out there you think haven't seen nothing on line


Sent from my iPhone using Tapatalk

[RubberCtyRauder]

No, trilogy is not making parts, used stuff comes up for sale once in a while. Your best bet is to post a list of parts you are seeking

[hotford]

http://i156.photobucket.com/albums/t28/hotford/IMG_2298_zpsgeqtfu1d.jpg (http://s156.photobucket.com/user/hotford/media/IMG_2298_zpsgeqtfu1d.jpg.html)
Hood clearance may need a slight cowl like this one, but from the under hood pic it doesnt seem to.
Here's one with the M122 set up!

[blkZooM]

Be prepared to possibly needing a cowl hood, I'm in the process of a similar build, m122 forged engine keeping mine under 500rwhp.. preferably 480ish I have the m122 setting into the lower intake and it already looks questionable for height, I believe the spacer is about 3/4in I tried to post a picture accept I'm beyond my allowance

He could simply just cut out a whole, weld on a metal cowl of his choice and move right along, saves money on buying a new cowl hood, shipping (risking damage and getting it painted is a wash since you would have to paint both either way) I recommend the Dodge Rumble be cowl scoop

[poohc1979]

If the M122 to need a slightly cowl hood which one is a good one without the cowl


Sent from my iPhone using Tapatalk

[RubberCtyRauder]

If the M122 to need a slightly cowl hood which one is a good one without the cowl


Sent from my iPhone using Tapatalk

Only one company making a hood for marauders. Class Glass or something in MD. they have 2 cowl sizes and one called power bulge

[SGT_MERC]

Class Glass Performance
http://www.classglassperformance.com/merc%20cr%20vic.html

[justbob]

I wanna to keep it to the right side not the left side.

Sent from my iPhone using Tapatalk

This makes zero sense.




Sent from my iPhone using Tapatalk

[guspech750]

This makes zero sense.




Sent from my iPhone using Tapatalk



I had a big WTF did I just read moment.


Sent from The White House on taxpayers dimes.

[MyBlackBeasts]

Yes I have the motor I'm trying to get all parts for the supercharger no eaton swap I wanna to keep it to the right side not the left side I see they have aftermarket plate for it now


Sent from my iPhone using Tapatalk

The right side is the Passenger side, so you are looking to do an eaton swap???

[blkZooM]

The right side is the Passenger side, so you are looking to do an eaton swap???

I'm going to say because he stated he wanted to "keep" it on the right side he meant left, can't keep it on a side it was never on

[Guittard22]

I have a nice start to a kit coming up stay tuned !

[510paesan]

http://i156.photobucket.com/albums/t28/hotford/IMG_2298_zpsgeqtfu1d.jpg (http://s156.photobucket.com/user/hotford/media/IMG_2298_zpsgeqtfu1d.jpg.html)
Hood clearance may need a slight cowl like this one, but from the under hood pic it doesnt seem to.
Here's one with the M122 set up!



Off topic but would anyone know the brakes and wheels setup pictured above? Tires camber clearances etc. Are these svt?


Sent from my iPhone using Tapatalk

[03mmmonroe]

Off topic but would anyone know the brakes and wheels setup pictured above? Tires camber clearances etc. Are these svt?


Sent from my iPhone using Tapatalk

The brake kit is Zack kit. Wheels do not no.

[RubberCtyRauder]

wheels are mustang, i believe gt500 staggered size

[hotford]

^^^^wheels are GT 500 2010,if your purchased a 2010 GT 500 rag top the wheels came in 18"
GT 500 coupes had the 19" ones.

[eric jones]

The M122 will fit under the stock hood!!!!!!