Rear ride height adjustment

[dmjarosz]

I recently installed rear control arms and watts links from Sparta Performance and what a difference they make. Probably the best handling mod out there. It seriously feels like a new car.

So I guessed a starting location for the ride height sensor bracket and the rear sits about 1/2" too low for my liking. How far do I have to move the bracket on the watts link to raise the ride height ~1/2"? Im thinking not very far but I dont wanna play trial and error all afternoon. Thanks!

[03blackvegas]

I just did this mod as well, mine sat too low so I just slid the bracket 3/8" in to give the factory height back. It does't take much.

[justbob]

1/8" goes a long way. It only took my three tries to get it perfect.


Sent from my iPhone using Tapatalk

[Gerry24]

I found this post from one of the members here...

[1Marauder]

Suggest before you do ANYTHING you use a sharpie and make a mark on the LOW spot first, and use that mark for your second and third adjustments. Ask me how I know!

[dmjarosz]

Suggest before you do ANYTHING you use a sharpie and make a mark on the LOW spot first, and use that mark for your second and third adjustments. Ask me how I know!

Oh definitely. I plan on marking a line at its present location so I always have a "zero" to go back to in case I screw up.