minimarine09
08-28-2017, 02:06 PM
This car has been one of my favorite cars ive owned.
build thread- https://www.mercurymarauder.net/forums/showthread.php?t=104123
im having trouble posting photos for some reason photos are in craigslist ad.
craigslist ad- https://tampa.craigslist.org/hil/cto/d/boosted-mercury-marauder/6283966516.html
Getting rid of because i Decided i want to start a full drag car setup. This car was my daily driver and is a 600HP + capable set up
interior- 8.75/10
exterior- 8/10
smooth ride, comfortable, roomy, powerful, great all around car.
still needs a tune, and a few odds and ends which i have parts for that i will include. but completely driveable as is (was my dd)
Asking price is 15k or reasonable offer
Mod list (its extensive so bare with me)-
ENGINE (2000 miles) : 4.6 DOHC teksid aluminum block (bored .020" over)
Manley platinum series pistons (17cc dish)
Manley rods
Kellog crank (un cut)
total seal file to fit rings
ARP headstuds, main studs, side bolts
clevite 77 main/ rod bearings
align honed
decked heads and block
cometic MLS head gaskets
stock heads/ cams (fresh valve job)
machine work done by United Speed World here in Tampa
shaved timing tensioners
SUPERCHARGER:
D1SC Procharger (always used procharger oil with service)
3.4" pulley
Innovators West 10%OD Damper (pullied for approx ~18psi)
Thump Racing billet tensioner
Aux. idler pulley
power pipe intake with AEM dry flow filter
3" intercooler piping with 3.5" procharger intercooler
procharger BOV
SCT BA 5000 maf (blow through)
FUEL:
2013 GT500 injectors (~55lbs)
dual enhanced ford GT40 fuel pumps
pprv delete
modified fpdm
brand new frps with KB disc
KB 40A Boost a Pump
individual wires for fuel pumps
hot wire mod for fuel pumps
larger fuel filter
DRIVETRAIN:
rebuilt 4r70w
3800 stall billet converter
aux trans cooler
upgraded flex plate
facory aluminum driveshaft
3.73 Ford Racing gears
Ford Racing Diff. cover
Auburn LSD
yukon 31 spline alxles
nex axle bearings/ seals
metco upper/ lower trailing arms
naake qa1 adjustable coilovers in front (factory bags in back)
OTHER:
PCV delete
Racetronix Dual baffled catch cans
Kooks long tube headers
x pipe/ flowmaster sigle chamber race mufflers
vibrant resonators
gauges-
AEM uego wideband
Prosport - Boost/ oil pressure
Autometer- fuel pressure/ trans temp/ volts
LED headlights/ fogs
Nitto nt555 tires in the rear (almost brand new) 295/45/18
on3 cross over delete kit
coolant mod for the heads...
im sure im forgetting stuff like the back up camera and navigation. Please text or call Asiel.
7279023975
thanks!
build thread- https://www.mercurymarauder.net/forums/showthread.php?t=104123
im having trouble posting photos for some reason photos are in craigslist ad.
craigslist ad- https://tampa.craigslist.org/hil/cto/d/boosted-mercury-marauder/6283966516.html
Getting rid of because i Decided i want to start a full drag car setup. This car was my daily driver and is a 600HP + capable set up
interior- 8.75/10
exterior- 8/10
smooth ride, comfortable, roomy, powerful, great all around car.
still needs a tune, and a few odds and ends which i have parts for that i will include. but completely driveable as is (was my dd)
Asking price is 15k or reasonable offer
Mod list (its extensive so bare with me)-
ENGINE (2000 miles) : 4.6 DOHC teksid aluminum block (bored .020" over)
Manley platinum series pistons (17cc dish)
Manley rods
Kellog crank (un cut)
total seal file to fit rings
ARP headstuds, main studs, side bolts
clevite 77 main/ rod bearings
align honed
decked heads and block
cometic MLS head gaskets
stock heads/ cams (fresh valve job)
machine work done by United Speed World here in Tampa
shaved timing tensioners
SUPERCHARGER:
D1SC Procharger (always used procharger oil with service)
3.4" pulley
Innovators West 10%OD Damper (pullied for approx ~18psi)
Thump Racing billet tensioner
Aux. idler pulley
power pipe intake with AEM dry flow filter
3" intercooler piping with 3.5" procharger intercooler
procharger BOV
SCT BA 5000 maf (blow through)
FUEL:
2013 GT500 injectors (~55lbs)
dual enhanced ford GT40 fuel pumps
pprv delete
modified fpdm
brand new frps with KB disc
KB 40A Boost a Pump
individual wires for fuel pumps
hot wire mod for fuel pumps
larger fuel filter
DRIVETRAIN:
rebuilt 4r70w
3800 stall billet converter
aux trans cooler
upgraded flex plate
facory aluminum driveshaft
3.73 Ford Racing gears
Ford Racing Diff. cover
Auburn LSD
yukon 31 spline alxles
nex axle bearings/ seals
metco upper/ lower trailing arms
naake qa1 adjustable coilovers in front (factory bags in back)
OTHER:
PCV delete
Racetronix Dual baffled catch cans
Kooks long tube headers
x pipe/ flowmaster sigle chamber race mufflers
vibrant resonators
gauges-
AEM uego wideband
Prosport - Boost/ oil pressure
Autometer- fuel pressure/ trans temp/ volts
LED headlights/ fogs
Nitto nt555 tires in the rear (almost brand new) 295/45/18
on3 cross over delete kit
coolant mod for the heads...
im sure im forgetting stuff like the back up camera and navigation. Please text or call Asiel.
7279023975
thanks!