FPDM what's needed to Upgrade

[BeeDamn]

Hi everyone it's been a while since I post here and I'm in the final process of installing eaton swap.

Actually I finished everything (hopfully) and the tunner (marty) said my FPDC % is high and need a dual or bigger one, So I bought another AEM and modified the hat a little bit. But I don't know if the wires need upgrading or not ?

And most importantly the FPDM upgrade what's need to be changed, Is it the transistor? The Capacitor? The Inductor? Or the Diod? And which spec do I need?

Please I need your help guys and I already asked Racerx but he's been awhile since his last time available.

Thanks

[robertmee]

I'm in the same boat...I wanted one but Noone seems to be modifying them anymore. I can do board solder work so if someone has the spec on what exactly was changed and the parts it'd be simple to modify my own.

[fastblackmerc]

I'm in the same boat...I wanted one but Noone seems to be modifying them anymore. I can do board solder work so if someone has the spec on what exactly was changed and the parts it'd be simple to modify my own.

I have a RacerX modded one you can try.

[robertmee]

I have a RacerX modded one you can try.

Appreciate it Jim, but I'd be in the same boat. I want one permanently, whether it fixes my current issue or not.

[tbone]

I'm in the same boat...I wanted one but Noone seems to be modifying them anymore. I can do board solder work so if someone has the spec on what exactly was changed and the parts it'd be simple to modify my own.

http://www.black306.com/?page_id=13

Upgrade the relay to a 30 amp as well. Keep the 20 amp fuse unless you upgrade the wiring. I didn't and have no issues except for the standard 20 amp relay.

[fastblackmerc]

Looking for the part numbers for the components used in the modification so I can make some of these. Repeated PM's to RacerX have not resulted in any replies.

[tbone]

Looking for the part numbers for the components used in the modification so I can make some of these. Repeated PM's to RacerX have not resulted in any replies.

He posted on the other site a couple times recently. I wrote him there because he owes me a new unit under warranty for well over a year now which he agreed to and he won't respond anymore. I wouldn't say anything but it's been a very long time and I believe he has had time to regroup or whatever he is up to.....

[fastblackmerc]

He posted on the other site a couple times recently. I wrote him there because he owes me a new unit under warranty for well over a year now which he agreed to and he won't respond anymore. I wouldn't say anything but it's been a very long time and I believe he has had time to regroup or whatever he is up to.....

PM'd him from the other site.

[tbone]

PM'd him from the other site.

So did I. No response.

[martyo]

I’ve tried reaching him too. No luck.

I need some modified FPDMs.

Jim, fill the void!!!!!!

[FordNut]

Anybody remember the guy's name who originally did the mod and sold them on ModularFords forums?

[FordNut]

Been out of the loop for awhile, go this from ModularFords:

After MJChip (Zone5) closed shop there was someone on Corral that was making the hopped up FPDMs for a while (perhaps still is) although I don't recall who. You might want to just use two FPDMs, one for each pump. That way if one failed you could easily replace it with a stock unit from a local parts store.

I sure hope mine dosen't fail since it seems nobody makes them anymore.

[RF Overlord]

Looks like Bill (RacerX) was the one building them. Haven't seen him on here for quite a while, though.

https://www.mercurymarauder.net/forums/showthread.php?t=90908&highlight=FPDM

An alternative might be one of these (https://www.dagostinoracing.com/dri-99-04-mustang-modified-fuel-pump-driver-module.html)? Dunno if they'll work on our cars...

[fastblackmerc]

As soon as can identify the components to upgrade I'll start modding them. Probably at the same cost.

[BUCKWHEAT]

Looks like Bill (RacerX) was the one building them. Haven't seen him on here for quite a while, though.

https://www.mercurymarauder.net/forums/showthread.php?t=90908&highlight=FPDM

An alternative might be one of these (https://www.dagostinoracing.com/dri-99-04-mustang-modified-fuel-pump-driver-module.html)? Dunno if they'll work on our cars...

I called DiAugustino but number is not "working". I also would like an upgraded FPDM.

[fastblackmerc]

I'm collecting parts and will likely start modifying them in 2 or 3 weeks. I expect the cost will be close to the same.

[Lowndex]

Looking for the part numbers for the components used in the modification so I can make some of these. Repeated PM's to RacerX have not resulted in any replies.

You make them and we will buy them. I will order one now.

[burt ragio]

I too will need one.

[RF Overlord]

Count me in, too, Jim.

[silversnake]

https://uploads.tapatalk-cdn.com/20171119/f926aa83d5659cfaee2f25d642ba2f 39.jpgModified FPDM. upgrade the wires when using the modified units. The stock unit is good enough with upgraded wires. I removed the modified unit and replaced with two stock units when I went with dual pumps.

[minimarine09]

I have a factory fpdm if anyone here needs one

[tbone]

I would also like one please. Good to have a spare.