PDA

View Full Version : Wanted To Buy wheels


Charlie Costell
11-13-2017, 11:01 AM
I do not know what happened to my earlier post, but I am looking for two very nice wheels to widen. I PM'ed another member twice but never heard back (I was told he had some).
The car is low miles and perfect, thus is why I would like really nice ones. Can anybody help.
Turbov6Bryan
11-13-2017, 12:23 PM
Maybe Gerald Irwin can help out

He hoards a lot of marauder parts
Spectragod
11-13-2017, 12:53 PM
Jerry lji372 probably has some, I have a pair that are already widened and pvd coated.


Sent from my iPhone using Tapatalk
Charlie Costell
11-13-2017, 04:32 PM
I PM'ed Jerry twice but did not hear back. So, I figured he did not have any.


I do not know Gerald Irwin.
Thanks for the responses.
RubberCtyRauder
11-13-2017, 05:26 PM
Jerry and Gerald are same person. He'll pop up
Spectragod
11-13-2017, 05:26 PM
Gerald Irwin=Jerry Irwin, same guy


Sent from my iPhone using Tapatalk
Spectragod
11-13-2017, 05:27 PM
Jerry and Gerald are same person. He'll pop up



TWSS



........


Sent from my iPhone using Tapatalk
Charlie Costell
11-13-2017, 05:34 PM
Thanks everyone for the quick responses. Much appreciated. Time to play with it after sitting in my climate controlled garage for 8 years. Still like brand new with 29000 miles. Marty is sending me a tune as well.
BAD MERC
11-13-2017, 05:54 PM
I have a spare pair that I am having widened so I'll wind up with a pair that are flawless. I have not considered selling them, yet. Who are you going to send them to?
Charlie Costell
11-13-2017, 06:00 PM
I believe the place is in Plymouth MI. They previously widened a set of 9c1 wheels for my 96 Caprice Cop car that we show. Did a nice job. I think they are called "Weld Wheel", but do not quote me on that.
Who were you planning to use?
Spectragod
11-13-2017, 06:06 PM
I believe the place is in Plymouth MI. They previously widened a set of 9c1 wheels for my 96 Caprice Cop car that we show. Did a nice job. I think they are called "Weld Wheel", but do not quote me on that.
Who were you planning to use?

Weldcraft...
warmpancakes
11-13-2017, 06:28 PM
How nice are you looking for? I have nice low mile (still have original tires) and NOS
RubberCtyRauder
11-13-2017, 06:37 PM
http://weldcraftwheels.com/
Charlie Costell
11-14-2017, 04:35 AM
Thanks to all for the information.
Sent "warmpancakes" a PM.


RubbercityMarauder, I believe you said you widened your wheels 1.5". Is that correct. Also, what tire are you running? Mine has stock front and rear now, so I would want the new rears to be compatible with the front circumferential wise.
Turbov6Bryan
11-14-2017, 06:26 AM
Thanks to all for the information.
Sent "warmpancakes" a PM.


RubbercityMarauder, I believe you said you widened your wheels 1.5". Is that correct. Also, what tire are you running? Mine has stock front and rear now, so I would want the new rears to be compatible with the front circumferential wise.

You will be able to run a nitto 295/45/18 and retain the original tire height with that size tire
Charlie Costell
11-14-2017, 06:31 AM
Thanks sir on the tire size input.
RubberCtyRauder
11-14-2017, 06:33 AM
pm sent to you Charlie
Charlie Costell
11-16-2017, 02:50 PM
Bump up.


I am waiting to hear from "warmpancakes", as well.