View Full Version : Lower radiator hose from engine to thermostat hose
TROY09
01-22-2018, 03:38 PM
Changing oil today and found hose twice it normal size . Ford no longer makes them and the aftermarket ones are 1/4 inch too small . Anyone have a good oem lower hose from engine to thermostat ? It’s the short one about 7 inches long.
Mr. Man
01-22-2018, 03:47 PM
Take it to your local FLAPS and see if there is one similar or that can be cut out from a longer hose.
justbob
01-22-2018, 04:41 PM
You can cut the section that’s bad off the tee fitting quite easily and replace it with a match up trimmed to fit like already mentioned. Just use a clamp when mating the new one to the tee. You could do all three and just reuse the tee if you really wanted.
That’s what I did for my radiator and coolant tank side when I replaced both of them with custom ones.
Sent from my iPhone using Tapatalk
stryker
01-22-2018, 04:44 PM
Take it to your local FLAPS and see if there is one similar or that can be cut out from a longer hose.
FLAPS ?, what is flaps ?
Enviado desde mi iPhone utilizando Tapatalk
Ambitious1
01-22-2018, 05:21 PM
FLAPS ?, what is flaps ?
Enviado desde mi iPhone utilizando Tapatalk
FLAPS: Favorite Local Auto Parts Store.
(Pep Boys, C.A.P., NAPA, Advanced, O'Reilly's, Autozone, etc.)
Ambitious1
01-22-2018, 05:24 PM
Changing oil today and found hose twice it normal size . Ford no longer makes them and the aftermarket ones are 1/4 inch too small . Anyone have a good oem lower hose from engine to thermostat ? It’s the short one about 7 inches long.
I think a number of members, including myself had the same issue a little while back:
https://www.mercurymarauder.net/forums/showthread.php?t=103012
TROY09
01-22-2018, 05:27 PM
Found a hose that should work. Cut to fit. Thank u for the help.
RF Overlord
01-22-2018, 05:52 PM
Let us know where you found it...part number...anything else to help.
TROY09
01-22-2018, 06:30 PM
Hose is a Gates 20687 for O’Reilly auto parts.
RF Overlord
01-22-2018, 06:56 PM
Cool...thanks!
Svashtar
01-22-2018, 08:22 PM
Hose is a Gates 20687 for O’Reilly auto parts.
Yes, thanks, making note of that. Mine is looking a bit soft and slightly bloated.
justbob
01-23-2018, 05:31 AM
That looks pretty close. It looks like you’ll be separating one section then?
Sent from my iPhone using Tapatalk
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.