steel wheels

[johnnyrauder]

im looking to fit my 03 cv 16in rims with steelys is there a part number to get the correct bolt pattern?

[RubberCtyRauder]

16 x 7, 5 x 4.50 don't buy the 7 oblong slotted ones. car-part.com. do you already have tires? if not then get the 17 x 7.5 offered 2006 and later. can not use 2002 or prior years, wrong offset

[johnnyrauder]

http://www.jegs.com/i/Cragar/260/342-5850/10002/-1?CAWELAID=1710865506&CAGPSPN=pla&CAAGID=44693592161&CATCI=pla-224468998391&CATARGETID=230006180039218524&cadevice=c&gclid=EAIaIQobChMIiuiT8Zqs2QIV EgeGCh1CKgdrEAQYBSABEgJ3SPD_Bw E was looking at theese

[RubberCtyRauder]

those are 15 x 8, and will not fit. just buy crown vic wheels

[johnnyrauder]

all the ones i see say 04-08 i have a 03 i always thought 04 and 03 were identical

[RubberCtyRauder]

very few aftermarket wheels fit CV. you need a +40 to +50 offset. are thesecfor winter use or ?

[johnnyrauder]

no everyday use the org. rims just look worn,was never crazy about them now the seal is leaking on two of them.

[RubberCtyRauder]

http://www.hubcaphaven.com/p/4300/stl3536-ford-mercury-wheel-steel-black-5w7z1007aa.html

[RubberCtyRauder]

can put cv center caps or full hubcaps on

[johnnyrauder]

those are nice, guess the $50 ones dont fit

[RubberCtyRauder]

The cragar rims do not fit..wrong offset.if you don't want to pay $100 for new, then go to craigslist or car-part.com and look for crown vic wheels 2003 and up. There has to be a crapload of decommissioned cv. taxis in NY

[johnnyrauder]

good tip thanks