PDA

View Full Version : Delete air ride


Lowndex
03-14-2018, 08:40 AM
Once removing the air ride system, what is required to make the ECU happy - stop the error code? Is there some some sort of trick to keeping the ECU from throwing the code?
martyo
03-14-2018, 12:36 PM
The PCM does not see air ride.

Remove the bulb from the cluster.

Yes, I am serious.
RF Overlord
03-14-2018, 01:29 PM
What Marty said ^^^

If you don't want to pull the cluster you can cut the DG/LG wire (pin 11) on C2131a, which is the black connector on the RAS module behind the glove box.
martyo
03-14-2018, 02:38 PM
What Ma’Lord said!
Lowndex
03-14-2018, 09:00 PM
Here are the codes I need help addressing, please.

https://imagizer.imageshack.com/v2/800x600q90/924/dgQFXU.jpg (https://imageshack.com/i/podgQFXUj)
martyo
03-14-2018, 11:22 PM
Here are the codes I need help addressing, please.

https://imagizer.imageshack.com/v2/800x600q90/924/dgQFXU.jpg (https://imageshack.com/i/podgQFXUj)

These are not codes you’ll easily address yourself.

Have you asked yiur tuner for help?
Lowndex
03-15-2018, 09:41 AM
Yes. The prior instructions for C1770, C1775 and B1869 have been shared. Thanks to all for the help.
GetMeMyStogie
03-20-2018, 01:42 PM
Too bad you can no longer disconnect just the RAS feature from the RAS/VAPS module.