Flasher

[badass mm]

I've heard the signal flasher is in the lighting control module is there any way to slow down the flash after putting LED lights in

Sent from my SAMSUNG-SM-J320AZ using Tapatalk

[RubberCtyRauder]

resistor at each bulb, or electronic flasher, but not familiar with which kind

[fastblackmerc]

I can fix you up with a flasher. You'll need to cut into one of the harnesses to the LCM. I provide very clear instructions with the kit.

[badass mm]

What's the positive of the Flasher compared to the resistors

Sent from my SAMSUNG-SM-J320AZ using Tapatalk

[ChiTownMaraud3r]

Lighting circuit is using less power with the LED bulbs. Resistors will draw the same amount as incandescents.

[justbob]

Lighting circuit is using less power with the LED bulbs. Resistors will draw the same amount as incandescents.



Plus a ton easier working in one spot, wiring not exposed to elements, and hot resisters scattered at all four corners. I did the flasher and don’t recall it being anything I’d consider real work.


Sent from my iPhone using Tapatalk

[badass mm]

Plus a ton easier working in one spot, wiring not exposed to elements, and hot resisters scattered at all four corners. I did the relay and don’t recall it being anything I’d consider real work.


Sent from my iPhone using TapatalkBut don't you have to solder it into the LCM

Sent from my SAMSUNG-SM-J320AZ using Tapatalk

[badass mm]

Where is the relay and where can you buy one

Sent from my SAMSUNG-SM-J320AZ using Tapatalk

[justbob]

Someone already did the homework.
http://www.crownvic.net/ubbthreads/ubbthreads.php?ubb=showflat&Number=1631699


Sent from my iPhone using Tapatalk

[BAD MERC]

I'll be doing this modification similar to LarryO did here ---->
https://www.youtube.com/watch?v=gAgDFtgu7Q4

But first I need to find donor LED taillights from a Mercury Montego.
I'll be using an electronic flasher to do this only once and correctly the first time. Modifications to the electrical system are not where you want to pinch pennies.

[badass mm]

Which plug do I cut the wires on the one closest to the console or the one closest to the door

Sent from my SAMSUNG-SM-J320AZ using Tapatalk

[justbob]

The one that has the matching colors?




Sent from my iPhone using Tapatalk

[badass mm]

when i pull the plug closet to the counsel lights went out is that the right one in that link u sent me it showed the plug was black mine are gray plugs just want to be sure

[justbob]

My man, everything you need to know is in the easy to follow link I posted. Here is an image that is in the same link. Look up the colors and obviously test them before cutting.
https://uploads.tapatalk-cdn.com/20180408/9c0f7bd88b626952a5d19823cb8f3a 60.jpg


Sent from my iPhone using Tapatalk

[fastblackmerc]

when i pull the plug closet to the counsel lights went out is that the right one in that link u sent me it showed the plug was black mine are gray plugs just want to be sure

My kit has instructions.