My marauder with 3 inch exhaust

[marauder4.6DOHC]

Here a couple of videos on my new 3 inch, open headers, and old exhaust.
https://youtu.be/spAuLDX2g4Q
https://youtu.be/SrYW2xKewvw
https://youtu.be/Orj3dadettI

[musclemerc]

Yes.... I like....

[justgod]

Yes.... I like....

+infinity:banana:

[musclemerc]

I'll say it before anyone else can....

You don't need a 3" exhaust

[marauder4.6DOHC]

I already know you gain only a little but I did it any ways to be different.

[musclemerc]

I like your kind of diffrent

[justbob]

Definitely sounds better!

I remember a dark night passing Casey (CBT) WOT down a highway in I believe Pennsylvania with my cut outs open, he fumbled for his two way and sounded like a 10 year kid as he yelled “dude! Every time you shift you have like an after burner glow of blue flammage dumping out!!! BAD ASS!!”

Ahh memories. [emoji6]



Sent from my iPhone using Tapatalk

[marauder4.6DOHC]

I think it will be better when it has a better tune in it. I also think I have some bad injectors.

[musclemerc]

I checked your fabricator on Facebook you should definitely post pics.

He did one Hell of a job fabbing your exhaust.

Very close to what Mowtown did on his setup.

[marauder4.6DOHC]

I don't even know how to post pics

[musclemerc]

Bro we need to get you up on it.

Register a new account at imgur.com, upload your pics then shoot me a PM when your done

[marauder4.6DOHC]

https://i.imgur.com/wP6L7ik.jpg

[marauder4.6DOHC]

http://imgur.com/gallery/kHHSUB8

[blazen71]

I think it's great. Who cares if you "need" it or not.

[Local Boy]

Very nice, brutha! :beer:
Aloha

[2,4shofast]

Nice work, is the rear of your car lowered at all?

[marauder4.6DOHC]

No it is not

[Seneca]

Looks good, I'll be making my over axle pipes 3in this winter just because

[blackhueys]

gotta love 3 inch exhaust one of the better but costlier mods I did to my marauder, full length tube headers with 3 inch all the way to the back with cutouts. I am in st.cloud by the way and have only seen one other marauder around here

[musclemerc]

Post up some pics of your setup.

[blackhueys]

Heres some pictures of before I installed the cut outs

[musclemerc]

Is that the older SW kit before they switched to 2.5"

Looks great!!!

[blackhueys]

Must be I had it installed at stainless works around 2011 its the long tube catted headers and full 3 inch cat back system. only issue I had was I blew the guts out on both cats one time they did replace them under warranty and the new ones I got were a bit differant, yes I have a trilogy but dang I am only pushing 9 psi never knew they downgraded to 2.5 inch

[justbob]

Must be I had it installed at stainless works around 2011 its the long tube catted headers and full 3 inch cat back system. only issue I had was I blew the guts out on both cats one time they did replace them under warranty and the new ones I got were a bit differant, yes I have a trilogy but dang I am only pushing 9 psi never knew they downgraded to 2.5 inch



Just the tail pipes were downsized.


Sent from my iPhone using Tapatalk Pro

[WPG_Merc]

Here a couple of videos on my new 3 inch, open headers, and old exhaust.
https://youtu.be/spAuLDX2g4Q
https://youtu.be/SrYW2xKewvw
https://youtu.be/Orj3dadettI

:cool::2thumbs::2thumbs:

[musclemerc]

Must be I had it installed at stainless works around 2011 its the long tube catted headers and full 3 inch cat back system. only issue I had was I blew the guts out on both cats one time they did replace them under warranty and the new ones I got were a bit differant, yes I have a trilogy but dang I am only pushing 9 psi never knew they downgraded to 2.5 inch

You got lucky with that one IIRC the previous offering was 3" to the muffler then 2.5" the rest of the way


Just the tail pipes were downsized.


Sent from my iPhone using Tapatalk Pro


Nah Bob the whole system is now 2.5" from collector to tip. I called and spoke to them before I fabricated my 3" kit.

[justbob]

You got lucky with that one IIRC the previous offering was 3" to the muffler then 2.5" the rest of the way









Nah Bob the whole system is now 2.5" from collector to tip. I called and spoke to them before I fabricated my 3" kit.



No kidding? But it fit so easily I was told. LOL

So there is actually three different variations in sizing over the years now? I would’ve thought the 2 1/2” tails would’ve been in place way before 2011 as well?


Sent from my iPhone using Tapatalk Pro

[blackhueys]

wonder why the change in sizing? I have had no fitment issues with 3 inch. I just had to double check on my car yes its 3 inch

[2mercs]

Worried about clearance issues with metco watts on lowered cars.

Sent from my SM-G965U using Tapatalk