PDA

View Full Version : Suspension Rebuild



rsdunphy
06-03-2018, 05:42 PM
Howdy out there,


Does anybody know of a rebuild "kit" for front and rear suspension, ya know, bushings, bearings, rubber and all that stuff?

510paesan
06-03-2018, 11:56 PM
ADTR sells a front and rear kit
Also control arms, watts links, sway bars, etc..

http://adtr.net/product/ford-crown-victoria/ridetech-hq-front-coil-over-system-03/

Gerry24
06-04-2018, 08:06 AM
Here you go --> http://www.moog-suspension-parts.com/category/mercury_marauder
In addition, add rear upper and lower control arms. They’re are many to choose from, there is a vendor here Spartan performance. Those are real good, I got them on my MM.

gdmjoe
06-04-2018, 10:38 AM
For the front lower control arms would recommend ...

NAPA part #s - 260-5262 RH (https://www.napaonline.com/en/p/NCQ2605262) / 260-5261 LH (https://www.napaonline.com/en/p/NCQ2605261) ллл -click- for details and pic's
*PRICEY, but polymer boots, grease fittings, life-time warranty. That, and got a shop discount.
.

rsdunphy
06-06-2018, 06:06 AM
thanks folks!

the fat bastid
06-06-2018, 01:00 PM
So you know, on moog's site the Front Lower Control Arm Bushing - Rear Position (k80833 and k80834) will NOT fit. their site is WRONG.