ON3 COT Delete Lower Radiator Hose

[crownvic97]

I have the ON3 COT delete on my Marauder, running the rear of the d/s Head to the thermostat housing and I have a fitting on the rear of the p/s Head that will be feeding the heater core. The only thing left is to figure out the lower radiator hose. I have a Mustang GT lower hose laying around from a few years ago from somewhere but it definitely won’t work.

Anyone have a picture of what they did for a lower hose setup? I’m guessing you could remove the thermostat housing from it and modify it to work in some fashion?

Thanks!
Mark

[justbob]

FWI you can cut the hose off the plastic tee fitting and match up whatever you need. Just reinstall onto the tee with a worm clamp.


Sent from my iPhone using Tapatalk

[Zack]

Pretty sure you need a crown Vic hose

[crownvic97]

Pretty sure you need a crown Vic hose

I didn’t even think of that as an option, I’ll see if that looks like it will work.


FWI you can cut the hose off the plastic tee fitting and match up whatever you need. Just reinstall onto the tee with a worm clamp.


Sent from my iPhone using Tapatalk

That sounds like a decent option as well, I’ll see what I could do with that.

Thank you gentlemen.

[crownvic97]

Pretty sure you need a crown Vic hose

You were correct, direct fit.

[Serge]

Mine is hooked up same as 2v.