Tailshaft Lube Mod

[justgod]

Anyone else have the tailshaft lube mod done and find it interferes with the shift select lever? @#$&%!!!! :depress:

[MOTOWN]

It shouldn't have any issues with shifting lever , I had Lonnies Tailshaft lube mod.

[justgod]

It shouldn't have any issues with shifting lever , I had Lonnies Tailshaft lube mod.

Shouldn't... BCA mod on mine.

[RF Overlord]

Bought the kit from Dennis (quite a few years ago) and had it installed locally. No issues.

[MyBlackBeasts]

Anyone else have the tailshaft lube mod done and find it interferes with the shift select lever? @#$&%!!!! :depress:
The metal line for the fluid feed to TS bushing could interfere with shift selection lever. If so, just re-curve the line away from the lever.

[justgod]

The metal line for the fluid feed to TS bushing could interfere with shift selection lever. If so, just re-curve the line away from the lever.

Its actually that 90 degree npt elbow and line coming out of the feed hole that is in the way. Hmmmm

[MyBlackBeasts]

Its actually that 90 degree npt elbow and line coming out of the feed hole that is in the way. Hmmmm


I'm doing mine right now. Will be completing this weekend. Will report back with findings when done.

[MyBlackBeasts]

https://uploads.tapatalk-cdn.com/20180625/df36361eb054fddc2d5c2c7f5577e6 71.jpg
I don’t see how your cable could be interfering with the brass fitting. Can u post a pic so we can see the issue?


Sent from my iPhone using Tapatalk

[justgod]

Thanks for that. Yeah, it's bizarre. The linkage and that not connecting the two want to go straight across that 90 degree brass fitting on mine. I'll get a pic when I can. Thank you

[TJCOX]

Shouldn't... BCA mod on mine.

BCA MOD? Where can it be purchased from.
Thanks!
Tom

[justgod]

BCA MOD? Where can it be purchased from.
Thanks!
Tom

Here: https://www.bcawebstore.com/index.php?l=product_detail&p=6

So I found that the 90 degree elbow coming out of the pressure port is pointed towards the ground and interfering with the linkeage. Simple mistake and easily fixed. That's what happens when you're working for days on the car and your brain is all fuzzy and you're frustrated as hell. :D

[decipha]

I'm in the process of gathering all the parts to eaton swap my 03. Will be doing this as well.

btw, Jerry W the J-mod guy did this to my cousins trans back in 2001 on his 95 mustang and in 17 years I hadn't had a single problem with it and thats on a stock rebuild 4r using borg warner frictions and putting well over 600rwhp through it. its a very worthwhile mod and cheap.

[MyBlackBeasts]

I'm in the process of gathering all the parts to eaton swap my 03. Will be doing this as well.

btw, Jerry W the J-mod guy did this to my cousins trans back in 2001 on his 95 mustang and in 17 years I hadn't had a single problem with it and thats on a stock rebuild 4r using borg warner frictions and putting well over 600rwhp through it. its a very worthwhile mod and cheap.


Yes, less than $20 for a bushing, 2 fittings ans steel line. Super easy to do, easy instructions to follow

[justgod]

By the way, thank you for the pic, it turns out the fitting was clocked too far and the line was in the way of everything. Dumb mistake on my part from working on the car until my brain was fuzzy. Its all good now. :beer: