PDA

View Full Version : Found the Problem



NorthShoreChiMM
06-24-2018, 09:09 AM
Have had FBM HID fog upgrade and they have been fantastic. But after washing my car I had come to turn on my fog lights and I heard the fuse pop. I cleaned all the connections, and I come to the driver side and a few of the connections are wet. Dry, clean, repeat. Then I shake the ballast. Its filled to the brim with water. I disconnected the driver side and test to see if the pass. fog pops on and nothing. The pass side connections were dry and the ballast is water free. No green fog light on the dash. Does both have to be plugged in to be working and would getting a new ballast solve all problems or do I need new connectors as well for the 1 side. Thanks
Mike
https://www.youtube.com/watch?v=Z5pTOqCBtw4&frags=pl%2Cwn

fastblackmerc
06-24-2018, 02:31 PM
Have had FBM HID fog upgrade and they have been fantastic. But after washing my car I had come to turn on my fog lights and I heard the fuse pop. I cleaned all the connections, and I come to the driver side and a few of the connections are wet. Dry, clean, repeat. Then I shake the ballast. Its filled to the brim with water. I disconnected the driver side and test to see if the pass. fog pops on and nothing. The pass side connections were dry and the ballast is water free. No green fog light on the dash. Does both have to be plugged in to be working and would getting a new ballast solve all problems or do I need new connectors as well for the 1 side. Thanks
Mike
https://www.youtube.com/watch?v=Z5pTOqCBtw4&frags=pl%2Cwn
Send me the ballasts and I'll get you new ones.

justbob
06-24-2018, 07:03 PM
^That right there is customer service!^


Sent from my iPhone using Tapatalk