4G to 6G Alternator Swap

[CrownVic75]

I just purchased a 200 Amp alternator to use on my CV. My CV currently has a 4G 110 amp alternator. The current (large) 3 wire plug has color coded wiring. I have the wiring diagrams for the 4G. I don't want to burn up my system by wiring the new connector wrong.

I don't have a wiring diagram for the 6G alternator. I'm assuming the pin out is the same as the 4G just with a smaller connector plug. The new (small) 3 wire connector pigtail has three black wires, no color coding, so I don't know which is pin 1.

My question is; Where is pin 1 in the voltage regulator connector, is it the pin closest to the large red output lug, (on the right looking at the alternator from the back)?
I don't want to burn up my system by wiring the new connector wrong.

[crownvic05]

http://www.idmsvcs.com/2vmod/alternator/wiring/diagrams/index.html

[CrownVic75]

http://www.idmsvcs.com/2vmod/alternator/wiring/diagrams/index.html


I've already been there, several times. No help.

In the connector picture, am I looking at the plug face on or from the back?

Thanks,

[crownvic05]

Plug face on

[CrownVic75]

Plug face on


Thanks, that's what I thought.

[Steve83]

This site requires an e-mail, but it doesn't have to be your real one:
http://www.bbbind.com/free_tsb.html
When you see WIRING DIAGRAMS, click that button.

[CrownVic75]

This site requires an e-mail, but it doesn't have to be your real one:
http://www.bbbind.com/free_tsb.html
When you see WIRING DIAGRAMS, click that button.


Thanks,
But I have both the "Wiring Diagrams" and "Workshop" manuals for my '04 CV.

.