View Full Version : Wanted To Buy Fog Light Assembly
smokn65
09-06-2018, 01:56 PM
Looking for the Fog Light plug and wiring harness. Any help would be appreciated
Part number 3W3Z-15A211-AA. I also need the plug the bulb goes in
fastblackmerc
09-06-2018, 05:35 PM
Looking for the Fog Light plug and wiring harness. Any help would be appreciated
Part number 3W3Z-15A211-AA. I also need the plug the bulb goes in
I can supply a harness with the correct plug at the foglight end and a WeatherPack connector for the other end. You will need to do some soldering.
smokn65
09-06-2018, 05:54 PM
Sounds great. Will it fit and lock into place with the original fog light
Sent from my iPhone using Tapatalk
03Merc
09-06-2018, 05:58 PM
I believe I have a set.
Sent from my iPhone using Tapatalk Pro
NorthShoreChiMM
09-06-2018, 06:03 PM
Can attest to the weather pack connectors. Just get a male and female 2 pin connector for each fog.
smokn65
09-06-2018, 06:03 PM
That would be great. How much for them
Sent from my iPhone using Tapatalk
fastblackmerc
09-07-2018, 04:43 AM
Sounds great. Will it fit and lock into place with the original fog light
Sent from my iPhone using Tapatalk
The connector for the foglight end is the same as the factory. You will need to cutoff the other end (round connector on the harness) and install a new connector. After you cutoff the connector, just strip the wires and crimp on the new connector.
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.