PDA

View Full Version : Wanted To Buy front door panels, driver DOT matrix trim



chief455
01-13-2019, 03:37 PM
I am casually on the look for a driver door DOT matrix trim in nice shape. Mine was wasted by poor cleaning tactics.

Also, both front panels have the typical flared out plastic under the door handle coves. It looks stupid like bell bottoms under the arm rests.
If you have a flat unwarped set of front panels, and are close / can ship low cost, let's see them.
Daily driver just trying to be a notch nicer.
thanks
Winsted CT 06098

RubberCtyRauder
01-13-2019, 04:19 PM
Goeff, I don't believe the door trim comes off..never saw it offered separate, I may be wrong as I have not looked at the the door skins myself. 5 min. Epoxy and some clamps on the arm rest covers work for most

Agent2006
01-13-2019, 04:25 PM
PM'ed ya....I have a pair of 2004 front panels, with heated seat buttons

chief455
01-13-2019, 04:28 PM
Goeff, I don't believe the door trim comes off..never saw it offered separate, I may be wrong as I have not looked at the the door skins myself. 5 min. Epoxy and some clamps on the arm rest covers work for most

hmmm....need a full driver door panel if this is so...:confused:

chief455
01-13-2019, 04:35 PM
PM'ed ya....I have a pair of 2004 front panels, with heated seat buttons

Jumping to PM^^

Spectragod
01-13-2019, 06:43 PM
Geoff,


I have 4 complete door panels, you can have them for -$0- if you need them.

chief455
01-13-2019, 07:44 PM
Geoff,


I have 4 complete door panels, you can have them for -$0- if you need them.

Darren,
I did not get any from offer above, so if shipping is included, please send close high resolution pictures and I'll consider it.
thanks,

Spectragod
01-14-2019, 06:12 AM
Shipping is not included, do you still wants pics?


Sent from my iPhone using Tapatalk

Joe Walsh
01-14-2019, 06:20 AM
Those are worth at least $8.00.....

...........EACH!!!

Really nice offer!

fastblackmerc
01-14-2019, 08:52 AM
Arm rest comes off. A little 5-minute epoxy and some clamps work well. I believe the trim comes off and can be wrapped with some carbon fiber vinyl. Something like this: https://www.ebay.com/itm/3D-Black-Carbon-Fiber-Matte-Vinyl-Wrap-Sticker-Decal-Film-Sheet-Air-Bubble-Free/122012342472?hash=item1c688098 c8:m:mipTM2CYl21BoS6qsgr3tUA:r k:11:pf:0

chief455
01-17-2019, 04:36 PM
Arm rest comes off. A little 5-minute epoxy and some clamps work well. I believe the trim comes off and can be wrapped with some carbon fiber vinyl. Something like this: https://www.ebay.com/itm/3D-Black-Carbon-Fiber-Matte-Vinyl-Wrap-Sticker-Decal-Film-Sheet-Air-Bubble-Free/122012342472?hash=item1c688098 c8:m:mipTM2CYl21BoS6qsgr3tUA:r k:11:pf:0

hmmmmm :coolman: I shall look into this, thanks.