View Full Version : Need Some Help with Strut Assembly Fasteners
Aerocoupe
02-14-2019, 08:34 AM
Does anyone know the thread on the three metric hex flange nylon lock nuts that fasten the top of the front strut assembly into the engine cross member? Ford only sells them with a kit to install the strut so I am trying to just find the locally.
fastblackmerc
02-14-2019, 08:45 AM
Does anyone know the thread on the three metric hex flange nylon lock nuts that fasten the top of the front strut assembly into the engine cross member? Ford only sells them with a kit to install the strut so I am trying to just find the locally.
Take one off and match it up at the hardware store.
1Marauder
02-23-2019, 11:01 AM
Does anyone know the thread on the three metric hex flange nylon lock nuts that fasten the top of the front strut assembly into the engine cross member? Ford only sells them with a kit to install the strut so I am trying to just find the locally.
And what about the rubber/foam piece that sits atop the spring?
Aerocoupe
02-23-2019, 12:16 PM
Do you need the part number?
1Marauder
03-04-2019, 07:32 AM
Yes, need the part number and Need the part... $116 at dealer.
Turbov6Bryan
03-04-2019, 04:56 PM
Yes, need the part number and Need the part... $116 at dealer.
The nylon hat piece? They are free when you buy a complete setup
Aerocoupe
03-04-2019, 05:03 PM
P/N 5W1Z-5415-AA
Used one on eBay for $32.75
https://www.ebay.com/p/Ford-OEM-Front-Suspension-Spring-Insulator-5-W-1-Z-5415-AA/1729959299?iid=173646023917&chn=ps
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.