PDA

View Full Version : Exhaust Shops


Mrauder83
03-20-2019, 04:02 PM
I just order a set of SW long tube headers, can any recommend a good exhaust shop to have them installed? I’m located in the Washington, D.C. area.

Thanks


Sent from my iPhone using Tapatalk
RubberCtyRauder
03-20-2019, 04:30 PM
You will need a tune as well
Mrauder83
03-20-2019, 04:31 PM
You will need a tune as well



Ordering my tune from Marty O. Will I need to get anything else before having them installed?


Sent from my iPhone using Tapatalk
RubberCtyRauder
03-20-2019, 04:56 PM
Marty will keep you up to date and ready.
Mrauder83
03-20-2019, 04:56 PM
Marty will keep you up to date and ready.



Ok thanks


Sent from my iPhone using Tapatalk
Joe Walsh
03-20-2019, 04:57 PM
I'd contact Maryland Muffler in Millersville

https://www.marylandmuffler.com/


or MBS/Mandrel Bending Solutions in Pasadena.

http://mandrelbendingsolutions.com/



.
Mrauder83
03-20-2019, 05:00 PM
I'd contact Maryland Muffler in Millersville



https://www.marylandmuffler.com/





or MBS/Mandel Bending Solutions in Pasadena.





http://mandrelbendingsolutions.com/



Ok, I appreciate it. I’ve heard a few people talk about MBS in the past.


Sent from my iPhone using Tapatalk
musclemerc
03-20-2019, 05:27 PM
I'd try to reach out to a fellow MM'er to see if someone can help.
You get lead pipes or just LT's?
Mrauder83
03-20-2019, 05:28 PM
I'd try to reach out to a fellow MM'er to see if someone can help.
You get lead pipes or just LT's?



Long tubes with cats


Sent from my iPhone using Tapatalk
offroadkarter
03-20-2019, 07:26 PM
See if Greg @ Pipe Dreams Fabrication would take on the job, I swear he's done a couple header installs on other cars.

https://www.pipedreamsfab.com/

Greg was THE GUY at MBS who built all the exhausts for any marauder that went to MBS, mine included. He's a good friend of ctrlraven's which is how everyone got in touch with him years ago.
musclemerc
03-21-2019, 03:47 AM
Long tubes with cats


Sent from my iPhone using Tapatalk

That makes it a very easy job. This will be bolt on and go!
Mrauder83
03-21-2019, 03:52 AM
See if Greg @ Pipe Dreams Fabrication would take on the job, I swear he's done a couple header installs on other cars.

https://www.pipedreamsfab.com/

Greg was THE GUY at MBS who built all the exhausts for any marauder that went to MBS, mine included. He's a good friend of ctrlraven's which is how everyone got in touch with him years ago.



Cool thanks for the info. I believe Greg was the guy that did my friend Nate Hawk Marauder, which was an awesome job!


Sent from my iPhone using Tapatalk