PDA

View Full Version : Knock Sensor w/Teskid



95chickn
03-21-2019, 11:32 AM
I recently brought a Teskid block for rebuild and realized that hose for Knock sensors is bigger that marauder block. What can I do here?

MCAT
03-21-2019, 01:14 PM
Bolt the sensor to the back of the head

Zack
03-21-2019, 01:23 PM
Throw it in the garbage, since it does nothing.

Joe Walsh
03-21-2019, 01:46 PM
Throw it in the garbage, since it does nothing.

LOL ...why do I get the feeling that you are not a big fan of the Marauder's knock sensor?

Invective
03-21-2019, 05:04 PM
Marauder gained a second knock sensor for the ’04 model year. Some insight into what a ‘knock sensor’ does (for those who don’t know):

Autopartswarehouse.com adds that a defective knock sensor does not properly adjust the timing of the engine when fuel enters the cylinder. This causes the vehicle to lose fuel mileage and acceleration. Additionally, a bad knock sensor causes irreparable damage to the engine. According to Repairpal.com, the knock sensor detects vibrations and transmits data to the engine computer. These vibrations or engine noises are caused by detonation.

When the knock sensor is damaged or broken, the detonation process is not regulated properly. Autopartswarehouse.com explains bad knock sensors also lead to excess engine noise. These noises are generally loud thumps and are a result of air or fuel entering the cylinder. Autopartswarehouse.com recommends identifying the symptoms of a bad knock sensor and replacing the part immediately. A new knock sensor helps avoid damage to the engine and eliminates costly repairs.

https://www.reference.com/vehicles/symptoms-bad-knock-sensor-f6577d9e0b00403a

musclemerc
03-21-2019, 06:18 PM
with a PD blower a knock sensor is useless.

You want knock protection get a Vampire knock controller.....

decipha
03-21-2019, 08:40 PM
I disagree. The marauder knock sensor works excellent when tuned properly.

This is a must read.
http://forum.efidynotuning.com/viewtopic.php?f=18&t=2418

musclemerc
03-22-2019, 04:03 AM
I disagree. The marauder knock sensor works excellent when tuned properly.

This is a must read.
http://forum.efidynotuning.com/viewtopic.php?f=18&t=2418


with a PD blower a knock sensor is useless.

You want knock protection get a Vampire knock controller.....

There is a reason Ford didn't put knock sensors on a Terminator. Blower whine triggers them on too easy.

Ambitious1
03-22-2019, 07:10 AM
Throw it in the garbage, since it does nothing.

Listen to Zack. He knows what he's talking about...

https://www.mercurymarauder.net/forums/showthread.php?t=96526

https://www.mercurymarauder.net/forums/showthread.php?t=28388

Invective
03-22-2019, 07:37 AM
Listen to Zack. He knows what he's talking about...

https://www.mercurymarauder.net/forums/showthread.php?t=96526

https://www.mercurymarauder.net/forums/showthread.php?t=28388

Most interesting read so far this morning- thanks for this.

Invective
03-22-2019, 07:42 AM
I disagree. The marauder knock sensor works excellent when tuned properly.

This is a must read.
http://forum.efidynotuning.com/viewtopic.php?f=18&t=2418

Thanks for this. Now wondering if the MartyO tune in my car took any of this into account...