PDA

View Full Version : Weld Racing Wheels on Front of MM


Aerocoupe
04-29-2019, 01:03 PM
Is anyone running a Weld Racing wheel on the front of their MM? If you are can you post up what wheel, diameter, and back spacing? Long story short is I need this info so that Weld has an idea of what fits around the brakes so we can see if a the ones I want will fit.
RubberCtyRauder
04-29-2019, 01:05 PM
See Chris at ADTR.NET he has Weld Racing on his Blue and sells them for panthers
Joe Walsh
04-29-2019, 01:22 PM
Mark (merc) has Welds on his badazz Marauder:

https://www.mercurymarauder.net/forums/showthread.php?t=106862
Aerocoupe
04-29-2019, 01:28 PM
Just called Chris and he got me squared up. Thought about that right after I read your post as I bought the sway bars and camber kits from him.

I guess the better question is does anyone have them with Zach's big brake kit? Chris warned me that the specs he gave me would not clear the Wilwood kit.
offroadkarter
04-29-2019, 05:17 PM
Just called Chris and he got me squared up. Thought about that right after I read your post as I bought the sway bars and camber kits from him.

I guess the better question is does anyone have them with Zach's big brake kit? Chris warned me that the specs he gave me would not clear the Wilwood kit.

The Zack BBK is only using a 2 piston floating caliper, it should clear the same way as stock. Wilwoods have a fixed six piston so it's thicker than the PBR 2 piston used in the Baer/Zack BBK.

You should be alright.