PDA

View Full Version : Replacement Hard Brake Lines



Madmax207
05-03-2019, 02:02 PM
I recent bought a new (to us) 2003 Marauder 300a that has traction control. The dealership I bought it from replaced the ABS Pump and control unit, wasn't given the reason why. After bring it home to New York from Indiana, I discovered one of the line from the rear port to the ABS pump was leaking at the pump end fitting. In the end I found that they had cross threaded the line fitting into the ABS pump block. I found the part Ford number for the brake line kit ( 3W3Z2C296AA ) which we also list on this site. I looked EVERYWHERE but all I can find is that it's no longer available. Does anybody know where they can be had or am I forced to replace the line with bulk line that can be bought at a place like NAPA. I was hoping to keep the car stock looking and would like to find the listed part if possible. Any help would be greatly appreciated!

RubberCtyRauder
05-03-2019, 02:41 PM
there was a car or two being parted out online here in for sale section..your best bet will be a part out car.

justbob
05-03-2019, 02:47 PM
FYI If you do end up making your own it is metric bubble flare.


Sent from my iPhone using Tapatalk Pro

burt ragio
05-05-2019, 05:42 AM
Is there any reason why you can"t just re tap the unit ?

BigCars4Ever
05-20-2019, 06:41 PM
In My 04 with traction control I used a pump unit from a 2006 town car and swapped the marauder electronics control onto it. Works no problem as long as your control unit is good.