Fuel filter clips

[MM2]

I went to replace the fuel filter on my 2003 and of course the clips broke. Napa filters have clips that are to big so I went to the Ford dealer and the filter they have did not have clips with it.
The stock ones are much thinner than the aftermarket ones .
Is there a source for stock size clips?

[Ambitious1]

I have used these with success:

www.ebay.com/itm/10Pcs-Fuel-Line-Retainer-Tube-Clip-Fastener-Retainer-For-Ford-Taurus-2002/132454521572?hash=item1ed6e79a e4:g:ijYAAOSwyGZaS1Ac

OR

https://www.ebay.com/itm/set-of-3-Ford-5-16-White-Fuel-Line-r-Clips-2F1Z-9A317AA-FREE-SHIPPING/264306797965?epid=1417762859&hash=item3d89e9ad8d:g:s54AAOSw N3lclnwb


The OEM Part No. is 2F1Z-9A317AA.

[MM2]

I have used these with success:

www.ebay.com/itm/10Pcs-Fuel-Line-Retainer-Tube-Clip-Fastener-Retainer-For-Ford-Taurus-2002/132454521572?hash=item1ed6e79a e4:g:ijYAAOSwyGZaS1Ac

OR

https://www.ebay.com/itm/set-of-3-Ford-5-16-White-Fuel-Line-r-Clips-2F1Z-9A317AA-FREE-SHIPPING/264306797965?epid=1417762859&hash=item3d89e9ad8d:g:s54AAOSw N3lclnwb


The OEM Part No. is 2F1Z-9A317AA.

Thank you for that information.
I am going to the Ford dealer tomorrow to look at the clips they ordered.
Hope they fit

[gdmjoe]

FIL NCK11 (https://www.napaonline.com/en/p/FILNCK11) - part # for the NAPA clips
.

LOTS less $$$ than FoMoCo's 2F1Z-9A317-AA
.

[Turbov6Bryan]

Oreillys help section contains three sizes for like four bucks and you get two of each size

[Marauderjack]

Be sure you remember to PUSH the clip in to remove the fuel line.....I learned the hard way and broke my share of 'em!!;):argue:

[03Merc]

I made an offer of $2.29 and it was accepted. I don't normally break them but some are more brittle than others. Good to have some spares.


Sent from my iPhone using Tapatalk Pro

[MM2]

Thanks to all for your input !
When I went to Ford to pick up the clips and filter the delivery had not gotten there yet so the counterman directed me to another NAPA and they had them in stock. Listed as for Police Interceptor .So I bought enough to change the filter several times.
But,
That did not solve my will not start issue.
Checked fuses and relay, OK
Jumped connectors for driver module , not OK, did not hear the pump hmmmm
I will try the jump trick 1 more time before changing the pump.
All stock, 25,000 miles hmmmmmmmmmmm

[Turbov6Bryan]

pound the tank and get the pump motivated.
What technique did you do to jump the driver module?