center gauge lights not working

[TonyD]

Is there a way to replace the bulbs

[Ambitious1]

Yes, you have to remove the center gauge, pull out the connectors in the back of the gauges. When you remove the center gauge, you will want to place the shifter as far as possible to "1", then firmly grasp both sides of the center gauge and gently pull up and out straight towards the center console. When I did it, I placed small hand towels on the center console and shifter so that way, if I was too rough, I wouldn't scratch the interior. If you do it firmly but gently, you won't break any of the clips holding the center gauge in place. Then replace the bulbs and put the center gauge back in. This may be a good time to upgrade to LED bulbs.

[fastblackmerc]

Is there a way to replace the bulbs

I can supply the LEDs bulbs if you are interested.

[TonyD]

Sure, let me know how to get the LEDs, I also thought about actually switching the fake oil pressure to a real one. Still trying to bring it back to life. Today I'm doing oil and coolant still want to do trans filter and diff fluid. The other day when I brought it home the check engine light came on and it was the egr. Replaced it. But as I went to park it, I turned it off and when I went to turn it back on.....I heard a clunk, and it was dead no power just the alarm light flashing. I disconnected the battery and then it came back to life. Wondering if it has some sort of ignition kill aftermarket alarm. Friday's project will be to swap the damaged door. I have an led kit I bought off amazon but I think those are just the overhead and mirrors.

[fastblackmerc]

Sure, let me know how to get the LEDs, I also thought about actually switching the fake oil pressure to a real one. Still trying to bring it back to life. Today I'm doing oil and coolant still want to do trans filter and diff fluid. The other day when I brought it home the check engine light came on and it was the egr. Replaced it. But as I went to park it, I turned it off and when I went to turn it back on.....I heard a clunk, and it was dead no power just the alarm light flashing. I disconnected the battery and then it came back to life. Wondering if it has some sort of ignition kill aftermarket alarm. Friday's project will be to swap the damaged door. I have an led kit I bought off amazon but I think those are just the overhead and mirrors.

PM me for details