Log in

View Full Version : Need some help with finding the ignition override/program switch



04SilverBirch
07-04-2020, 05:34 PM
Some people call it a valet switch? Point is, in the steps to program a new key fob, I need to hold this button down, and I can’t find it. Checked all the locations where everyone said it might be (under the dash, center console, glovebox, etc)

The car has a full on dealer installed PowerCode security and remote start system that is operational. Has a status LED and all. This switch is part of the system but I just can’t find it??? I wish I could find a wiring diagram, because I could trace the wires from the security module to the button. So frustrating man.

MyBlackBeasts
07-04-2020, 07:00 PM
My switch & LED were hanging behind the drivers kick panel.

04SilverBirch
07-05-2020, 05:59 AM
My switch & LED were hanging behind the drivers kick panel.
Thanks for the tip man. Searched there but found nothing. Last night I found a 20 year old forum with a blurry photo and it was a wiring diagram of my module; I got wires to trace.

04SilverBirch
07-05-2020, 11:37 AM
Found the switch, had to take apart the whole driver side dash. Was in an inaccessible location.

MyBlackBeasts
07-05-2020, 07:45 PM
Found the switch, had to take apart the whole driver side dash. Was in an inaccessible location.

That was the [roblem with dealer install, the job was do0ne only as good as the tech doing it... :shake:

justbob
07-05-2020, 07:59 PM
That was the [roblem with dealer install, the job was do0ne only as good as the tech doing it... :shake:

How much did you drink this weekend homie?


Sent from my iPhone using Tapatalk Pro

bawazir
07-06-2020, 12:12 AM
Hi Bob!!!!!

justbob
07-06-2020, 02:24 PM
Hi Bob!!!!!

Well slap my booty and call me Sally! What’s up my man??


Sent from my iPhone using Tapatalk Pro

MyBlackBeasts
07-06-2020, 08:57 PM
How much did you drink this weekend homie?


Sent from my iPhone using Tapatalk Pro

None unfortunately, taking antibiotic... :depress: