Oil cooler?

[FordNut]

Will the CVPI oil cooler and block adapter fit the DOHC engine?

If not, how about using the cooler in conjunction with a remote oil filter adapter?

For anyone not familiar with these units, they are oil-to-water heat exchangers which connect in line with the radiator hose.

[RF Overlord]

I thought our motors already HAD an oil-to-water cooler?

[schuvwj]

Are there Oil to Air coolers that can be added?

[FordNut]

Yes, lots of aftermarket units are available, but the CVPI unit is an OEM Ford part.

[Pantherman]

High oil temps on these engines are basically a product of sustained very high RPMs. If you use synthetic oil, unless you are doing a major soup up, you really won't need a cooler.

[RCSignals]

Since the block is basically the same, the PI oil cooler should fit. There might be interference with the front ant-sway bar though, so you may have to go to the PI anti-sway bar as well