PDA

View Full Version : ON / OFF Drivers Seat Heater Switch



BLACKMARAUDER04
01-09-2021, 09:58 AM
Can anyone supply the OEM part number for the ON / OFF Drivers Seat Heater Switch? I've searched on TASCA and can't locate it.

Interior Trim - Front Door for 2004 Mercury Marauder | TascaParts.com (https://www.tascaparts.com/v-2004-mercury-marauder--base--4-6l-v8-gas/body--interior-trim-front-door)


https://www.tascaparts.com/v-2004-mercury-marauder--base--4-6l-v8-gas/body--interior-trim-front-door

MyBlackBeasts
01-09-2021, 06:22 PM
Can anyone supply the OEM part number for the ON / OFF Drivers Seat Heater Switch? I've searched on TASCA and can't locate it.

Mine doesn't have heated seats. Can you upload a pic of where the switch is and what it looks like?

MyBlackBeasts
01-09-2021, 06:23 PM
Any of these help?
https://www.carid.com/2004-mercury-grand-marquis-power-heated-seats/

fastblackmerc
01-10-2021, 11:06 AM
Can anyone supply the OEM part number for the ON / OFF Drivers Seat Heater Switch? I've searched on TASCA and can't locate it.

Interior Trim - Front Door for 2004 Mercury Marauder | TascaParts.com (https://www.tascaparts.com/v-2004-mercury-marauder--base--4-6l-v8-gas/body--interior-trim-front-door)


https://www.tascaparts.com/v-2004-mercury-marauder--base--4-6l-v8-gas/body--interior-trim-front-door

What's wrong with yours?

BLACKMARAUDER04
01-10-2021, 06:42 PM
Doesn’t turn on / off most times I try to use it.

That part is made by standard. I got that from google. Looking for Motorcraft.


Sent from my iPhone using Tapatalk

BLACKMARAUDER04
01-10-2021, 06:49 PM
So I saw the standard showed Town Car so I found this Motorcraft 3W1Z-14D695-AA.


Sent from my iPhone using Tapatalk

BLACKMARAUDER04
01-10-2021, 07:01 PM
Carid is over $40 + shipping
EBay has it under $20 inc shipping.
Tasca is under $13


Sent from my iPhone using Tapatalk

alumarine
01-11-2021, 08:29 AM
Have you checked the switch with a meter?
If it's like my town car it just sends a negative pulse to the Heated Seat Module.

BLACKMARAUDER04
01-11-2021, 10:43 AM
If I’m going to take the door panel off, I’m just going to replace it. It stoped illuminating anyways when the lights are on.


Sent from my iPhone using Tapatalk

BAD MERC
01-12-2021, 10:16 AM
And the new ones will, too. Mine have been replaced four times. Apparently it's a solder issue and not the LED just burning out. It's frustrating because this isn't 1982.

fastblackmerc
01-12-2021, 11:00 AM
I can fix your switches.

BLACKMARAUDER04
01-12-2021, 11:02 AM
Same solder issue as the LCM.
Poor overseas manufacturing!


Sent from my iPhone using Tapatalk

fastblackmerc
01-12-2021, 11:04 AM
And the new ones will, too. Mine have been replaced four times. Apparently it's a solder issue and not the LED just burning out. It's frustrating because this isn't 1982.

That is correct.... in the '80's and earlier you were able to use high content lead solder. Now due to regulations lead is no longer prevalent in solder, hence the connections are more prone to cracking, especially in vehicles.

I use lead solder in my repairs.

BLACKMARAUDER04
01-12-2021, 11:08 AM
Yes, I have 2 repaired LCM’s from you.


Sent from my iPhone using Tapatalk

BLACKMARAUDER04
04-11-2021, 05:45 PM
So the switch is discontinued by Ford. eBay sellers are trying to order from Ford. Picked it up on Amazon. Used item SW7171. Under $20


Sent from my iPhone using Tapatalk