heat & noise shielding

[azgolfrat]

Hey guys,
I have a few jobs to get done and I am wondering if there is one good product out there that could do all of them for me

1) The insulation under the car, (seats) on either side of the transmission is coming apart big time and makes working under the car in that area no fun; like breathing insulation while working in the house attic

2) Need to thermally insulate the EGR tube

3) With stainless works headers coming soon (ADTR), I know I am going to want to protect the starter and some portion of the cabling going to the starter

Dynamat was previously recommended for the EGR tube, however, a look at Dynamat's website left me wondering which product of theirs to use. Is there a single product out there you could recommend that would let me get all 3 jobs done well?

Thanks guys

[justbob]

I removed all that crappy insulation off the floor, firewall, and even the A/C box and painted the entire underside of the car and wall with truck bed coating. (Car was all but stripped underneath at the time and seemed logical.. Turned out stupid nice! I just put a couple of rolls of this on the floor under the carpet and as much as I could reach up the inside firewall. You can go crazy on sound deadening products but this was more than adequate for me, I’m simple. And also the A/C had zero change in temps with it left off. This was the actual company I used to cover part of the rear cooling mod I told you about. Not a perfect solution but effective and out of site.

https://www.summitracing.com/parts/the-14620

As for the starter I just used a cheap one from DEI if I recall.

https://www.summitracing.com/parts/dei-010402?seid=srese1&gclid=EAIaIQobChMIpeXd4vGU7gIV Hv_jBx0uLgM1EAQYASABEgK91vD_Bw E

My billet Jegs hi torque mini starter still looks brand new! Hate to cover it but...




Sent from my iPhone using Tapatalk Pro

[03Merc]

I got a new one off of eBay. I removed the one over the AC Heater core box as well. https://uploads.tapatalk-cdn.com/20210112/47b3d1d33d6256a991d0b7d5e1c2b3 73.jpg


Sent from my iPhone using Tapatalk Pro

[azgolfrat]

Wow - that looks nearly OEM.
Do you recall the seller name or product name? Nice job!
Thanks for the reply!
-KK

[azgolfrat]

JB,
Thanks very much for the info..when I get the jobs done I will post details.
-KK

[03Merc]

Wow - that looks nearly OEM.
Do you recall the seller name or product name? Nice job!
Thanks for the reply!
-KK

eBay item number 191975121278

I paid $85. https://uploads.tapatalk-cdn.com/20210115/53e8eccc86f8d86516464e42ebc4ef f1.png

https://uploads.tapatalk-cdn.com/20210115/f0187ad49c4f893721ee38c6e16772 36.png


Sent from my iPhone using Tapatalk Pro

[MyBlackBeasts]

eBay item number 191975121278

Strange, it says doesn't fit 03 or 04 Marauder.

Did you have to make any alterations to get it to work?

[03Merc]

Strange, it says doesn't fit 03 or 04 Marauder.

Did you have to make any alterations to get it to work?

There is one part You have to tear to fit around the body mount on the frame if I recall correctly. Fits great other than that.

[justbob]

That honestly wouldn’t ever fit in my car. Yes my tranny is that tight! (Where’s Casey for that comment? [emoji43])


Sent from my iPhone using Tapatalk Pro

[MyBlackBeasts]

JB "Yes my tranny is that tight! (Where’s Casey for that comment? https://emoji.tapatalk-cdn.com/emoji43.png)"


:rofl::rofl::rofl::rofl::rofl: