PDA

View Full Version : Blend Door Actuator replace now airbag light on.


Pantera
02-07-2021, 04:48 PM
Well, my ac is working great now. thanks to the sticky. Now These issues popped up after I connected the battery.
1. Airbag light is on, I checked connection and it’s tight
2. Radio turns on but no speakers
3. Power steering feels stiff

What can be the problem?
04SilverBirch
02-07-2021, 05:05 PM
Look up a fuse diagram and see if there’s a fuse that controls the speakers, power steering variable assist, and airbags.
RubberCtyRauder
02-07-2021, 05:43 PM
There is a module behind glove box for steering..ras module, which I think is for steering and airbag.. maybe it got knocked or diaconnected or a wire pinched doing blend door.
crouse
02-07-2021, 05:51 PM
My power steering was stiff, so I lubricated the U-Joint under the hood on the drivers side down by the exhaust manifold.
Pantera
02-07-2021, 06:24 PM
Thanks fellas, I will check all this and let you know the outcome tomorrow.
04SilverBirch
02-09-2021, 12:02 PM
Thanks fellas, I will check all this and let you know the outcome tomorrow.
Any update?
Pantera
02-09-2021, 06:22 PM
Just got done. checked all the above and no luck. Maybe Friday I will take it in and run a diagnostic on it.
For some reason it feels more ballsy now. Weird.
Turbov6Bryan
02-11-2021, 05:25 AM
Module does ras vaps.
steering and air ride...
check all your fuses , maybe pinched a wire putting the air bag back in
BLACKMARAUDER04
02-11-2021, 12:59 PM
Check fuse 18. Can you see the temperature on your HVAC?
fastblackmerc
02-11-2021, 03:17 PM
Check fuse 18. Can you see the temperature on your HVAC?

Fuse #18? That's for the fog lights. Fuse #23 is for the EATC.

OP, check fuse #16(15A) in the fuse box in the passenger compartment, #114(30A) in the power distribution box under the hood (behind the battery) and #115(50A) - feeds #16 inside.
fastblackmerc
02-11-2021, 03:21 PM
Well, my ac is working great now. thanks to the sticky. Now These issues popped up after I connected the battery.
1. Airbag light is on, I checked connection and it’s tight
2. Radio turns on but no speakers
3. Power steering feels stiff

What can be the problem?

Did you take out the radio to change the blend door actuator? Check the connectors that plug into the radio. They should "click" in.

See post #10 for power steering issue.

Airbag, try disconnecting the battery for a few minutes. Make sure the connector to the airbag is tight and making good contact. No pinched wires.
BLACKMARAUDER04
02-11-2021, 05:46 PM
Sorry, I meant 16. My range sensor will blow that.


Sent from my iPhone using Tapatalk
Pantera
02-11-2021, 06:03 PM
The air ride on my marauder has been removed ever since I got it. Also the airbag light is on solid no intermittent blinks. But I will check more on this tomorrow before taking it in. Thanks for all the tips.
Pantera
02-11-2021, 06:05 PM
Oh and regarding the question on the ac, it works great. I can see the temp.
Pantera
02-12-2021, 05:23 PM
Finally figured it out. I feeel so dumb... There’s a plug under the right side of the glove box that connects with a gold color bolt. I loosened it when I wedged the dashboard thinking it was part of the disassembly and forgot to tighten it back up. Thanks guys for all the help. Its crazy all the problems this issue created.