Engine cowling above firewall

[azgolfrat]

Hey Guys,
This cowling, is part # 6W7Z5402228AA
looks to be discontinued. I'd like to replace mine.
I think the crown vic and the grand marquis (03/04) might be the same?
If so, I could probably get one from a junk yard.
Does anyone know if they are the same, or where I could get a new one, or a used one that is in good shape?
Thanks
-KK

[SilverPhoenix]

I was looking for info in regards to the MM's windshield and happened across this:

https://thepartsfarm.com/products/2003-2004-mercury-marauder-hood-windshield-cowl-vent-panel-oem

[Mr. Man]

I replaced one of ours and had to adjust the wiper fluid hoses. Since it was different, I guessed it was a Marquis panel. If you go to a junkyard make sure the screw holes on the passenger side are not broken.

[offroadkarter]

I replaced one of ours and had to adjust the wiper fluid hoses. Since it was different, I guessed it was a Marquis panel. If you go to a junkyard make sure the screw holes on the passenger side are not broken.


In 06 they slightly revised the wiper cowl, I believe that part is still available from Ford. Blackened300A put one on his car and noted that he had to re-route the washer hose.

[azgolfrat]

I was looking for info in regards to the MM's windshield and happened across this:

https://thepartsfarm.com/products/2003-2004-mercury-marauder-hood-windshield-cowl-vent-panel-oem

I saw that one. Pretty beat up. Thanks though!

[03Merc]

I saw that one. Pretty beat up. Thanks though!

I have one that's in good condition. They all seem to break on the passenger corner tho. Lmk


https://uploads.tapatalk-cdn.com/20211205/77d39abbd1fb94320d6b9cacc42d28 d0.jpg
https://uploads.tapatalk-cdn.com/20211205/38596239cfaa283aa0674fbaf805e7 97.jpg


Sent from my iPhone using Tapatalk Pro

[massacre]

I have one as well, but need to put eyes on it. It's in a different garage that i haven't been to in a while. Pretty sure the corner is not broken

[blazen71]

Buy a new one. It makes the underhood look a lot cleaner. I just replaced mine and it made a big difference. I had an NOS one.

[musclemerc]

^^Not an option, the cowl cover is discontinued for all CV, GMQ, and MM

[azgolfrat]

NOS = new old stock?

[blazen71]

^^Not an option, the cowl cover is discontinued for all CV, GMQ, and MMToo bad. I didn't know.

[blazen71]

NOS = new old stock?Yes.......

[offroadkarter]

^^Not an option, the cowl cover is discontinued for all CV, GMQ, and MM

Well that sucks, I just went and checked on Tousley and you're 100% right.

Guess I better always remember to pull that one screw in the left corner and not crack the corner off.

[03Merc]

Well that sucks, I just went and checked on Tousley and you're 100% right.

Guess I better always remember to pull that one screw in the left corner and not crack the corner off.

Vibration causes it to crack, I would go loosen Yours a bit.


Sent from my iPhone using Tapatalk Pro

[BLACKMARAUDER04]

I see a number of them on Ebay sold by LKQ. Just order a can of satin black paint, or Charcoal (matches the interior of the Marauder)
and repaint it. Personally, I'll look at Pick a part for it next time I go.

[massacre]

I have one let me know if you are interested.
Will be a pain the ass to ship though, it's pretty long