Anybody running "Magna Flows"

[Architect]

I'm replacing "old" magna flows...
I believe I need 2 1/2", 4 X 9" oval Center/Offset straight through performance Mufflers.
Anybody using these and am I correct in the description?

I have to replace my old ones because the hanger rod broke off the muffler and took a half dollar size plug out of the exterior of the muffler..!!!
No will touch repairing it.... these are about 16 years old and the sound is perfect (to me anyway).

So now I have to replace with new and break them in....

As always, Thank folks for your time and advice... :bows:

Architect

[BackNBlack]

Anybody running "Magna Flows"
Yes...52201

[blazen71]

I'm replacing "old" magna flows...
I believe I need 2 1/2", 4 X 9" oval Center/Offset straight through performance Mufflers.
Anybody using these and am I correct in the description?

I have to replace my old ones because the hanger rod broke off the muffler and took a half dollar size plug out of the exterior of the muffler..!!!
No will touch repairing it.... these are about 16 years old and the sound is perfect (to me anyway).

So now I have to replace with new and break them in....

As always, Thank folks for your time and advice... :bows:

Architect
Are you able to get under the car with a tape measure? That would be your best bet. They could be any number of sizes based on who and how they were put in.

[Architect]

Beautiful installation... thanks

[baloneyhomie]

I'm currently running Magnaflow 4"x9" STs. I believe the right P/N for these cars is the Magnaflow 11224s. I purchased 11225s since I could've sworn the diameter was 2.25" but not quite. At the shop the guy who was welding them in pointed out the outlet was slightly more than 2.25" and the inlet was 2". My exhaust is entirely stock otherwise.

That's just my 2 cents though. I'd definitely double-check before you get your mufflers.