PDA

View Full Version : 03 MM - 1st rebuild engine run - logged data in hand...what does it say?



azgolfrat
02-20-2022, 01:09 PM
Hey guys, got the engine running, sorta.
It idles pretty rough.
On Friday just past Marty and an expert (in Georgia, and I'm in AZ) were all set to data log and analyze, and, ugh, the battery died; it had been used to crank over quite a few times, but not much charging. I left the trickler off for two nights and that was it. So, the battery is recharged, and Marty can't go until Tuesday, so I figured out how to use Livelink, my X4 and a config file Marty and company had sent me. I data logged for a good 90 seconds; car ran very rough, then not bad, then stalled. The car is still up on jack stands.

So I have ~140 secs worth of data from the 17 parameters Marty wanted to look at on the graphs in front of me now.

Anyone care to look at the data? I can download the csv file from LiveLinkGen2 program and email it. Help would be much appreciated.
Thanks
-KK
data

blazen71
02-21-2022, 06:07 AM
Just work with Marty on this.