Seat question

[RogerA]

Hello-I’m new here and recently acquired a 2004 marauder. The interior is in nice shape overall with the exception of the drivers seat. I removed it and had an upholstery shop do some repairs. I reinstalled and now the recline is not working. I checked all three connections still no recline. I removed the seat and started investigating and noticed a dangling yellow plug in the rear of the seat ( I think it’s for the airbag) not connected to anything. I removed the two screws on the plastic cover and found a yellow plug in there that will plug into it. My question is how do I get the wire through the seat to connect to the other? Otherwise I would have to run it outside of the seat. Any ideas on why no reclining? It all worked before I removed it. I would appreciate any advice. Thank you Roger

[Ambitious1]

I'm not an expert, but if everything is plugged in the way it should be, I would check with the fuses and go from there. Do all the other seat functions work? Does the seat move backward and forward?

[burt ragio]

Check power into and exiting the switch. If that is good try power direct to the motor.

[MyBlackBeasts]

Be careful, many times yellow wires are airbags. Make sure there is no air bag in the upper seat bolster that you could set off accidentally.