PDA

View Full Version : Hose - Part # needed


sspmustang
05-30-2022, 10:28 AM
Can anyone provide it? I can't seem to track this hose down anywhere. Thanks.


52427
blazen71
05-30-2022, 11:05 AM
https://www.mercurymarauder.net/forums/showthread.php?91975-Can-someone-tell-me-what-this-hose-on-air-intake-is
sspmustang
05-30-2022, 01:16 PM
Thanks. P/N 5W7Z-6758-BA seems to be what I need, although it sure appears different then just a simple 90 degree elbow.
blazen71
05-30-2022, 01:23 PM
It looks like on the current version you would cut the old hose off and reuse the original ends. Assuming the quick connect fittings on the new one work with the old ends.

https://www.newautoparts.com/oem-parts/ford-pcv-hose-5w7z6758ba?c=Zz1lbmdpbmUmcz1ha XItaW50YWtlJmw9NSZuPUFzc2VtYmx pZXMgUGFnZSZhPW1lcmN1cnkmbz1tY XJhdWRlciZ5PTIwMDQmdD1iYXNlJmU 9NC02bC12OC1nYXM%3D
blazen71
05-30-2022, 01:29 PM
Otherwise I have an original you can have for $10 (shipping and handling).
sspmustang
05-30-2022, 03:08 PM
Thanks for the offer. Let me see what I can dig up here.
gdmjoe
05-31-2022, 07:47 AM
blazen71 - Otherwise I have an original you can have for $10 (shipping and handling).
What's the complete part # on the label?
.
BUCKWHEAT
05-31-2022, 09:27 AM
Is it about 1 1/4 inch inside diameter? If so, it is a DAYCO 70989. I have a new one free to you, if you pay postage, I'm guessing under $5. Send me a PM if that helps.
sspmustang
05-31-2022, 06:21 PM
Thanks, let me check it tomorrow.
sspmustang
05-31-2022, 06:23 PM
..........
Prospect62
06-02-2022, 04:04 AM
I used this:

Amazon.com: Dorman 46032 EVAP Emission Hose Compatible with Select Dodge Models : Automotive (https://www.amazon.com/gp/product/B004BSVCE0/ref=ppx_yo_dt_b_search_asin_ti tle?ie=UTF8&psc=1)

I had to trim a bit off one end but it fit perfectly after that. Nice and robust, looks factory & no EVAP leaks yet! Yes I know it says "Dodge models" but the way this hose is shaped and curved, it fits in there really well.
sspmustang
06-02-2022, 03:59 PM
The ID of this hose is 3/4", so the Dayco hose won't fit. I did pick up the Dorman 46032 hose from O'Reilly, had a $10 coupon so net cost only two bucks and change. After cutting it to match match the old one. it's a bit tight, but working it on the intake side and then the PCV valve with the help of some WD40 and it will stay put.

Appreciate everyone's assistance on this. Between this and the passenger side PCV hose, it was a PITA to track these items down.