PDA

View Full Version : Advice needed and requested


1Marauder
10-09-2022, 10:22 PM
Need NEW sway bar end links. Have the tube Addco front sway bar. Which ones are best? Recommendations?
RubberCtyRauder
10-10-2022, 03:51 AM
IIRC, Moog was used regularly. I bet GdMJoe has a part number
Ambitious1
10-11-2022, 04:46 AM
+1 on the Moog end links. Moog Part # K80140.

These links may help:

https://www.summitracing.com/parts/mog-k80140/overview

https://www.mercurymarauder.net/forums/showthread.php?67017-moog-end-links
musclemerc
10-11-2022, 05:33 AM
It all depends. What year is your car? If it's a 04 you need to get a set of locks from Addco to keep the bar centered so the end links don't contact.

Moog end links are larger than the OEM end links. The last 04 I did I went with OEM end links not Moogs. No contact issues with the locks in place.

My 03 does not need the locks and I run Moogs no problem. But some 03's had this issue too.
Comin' in Hot
10-11-2022, 07:43 AM
It also depends if your lowered or have a big brake kit, i know the Baer/Jerry kits will break the grease fittings off the thickers moog endlinks. I would stick with the OEM style.
1Marauder
10-11-2022, 10:19 PM
Thanks so much all. Ordered Moogs for this one... As no big brake kit. Will OEM other two when needed... And am fairly sure I have the sway bar locks to keep it from walking.