JMOD Kit Question

[cat in the hat]

Who, if anyone, is still selling complete Jmod kits (valve body, separator plate, everything ypu need) ?

If I can get absolutely everything needed for a straight swap, I would get a shop to do it.

There is plenty of OLD info about Darrin, BCA, Lonnie Doll, Eric at North Georgia Trans etc., but I can't find any current info.

[cat in the hat]

Wow, 61 views and not one response. :alone:

[offroadkarter]

BCA seems to still something, I can't vouch for it (IE: if you order, will it show up). https://www.bcawebstore.com/index.php?l=product_detail&p=24

This was always a historically "DIY" mod back in the day, drilling the separator plate and removing the shift accumulator springs. If you were going to have a shop do this, tons of documentation still out there on TCCOA and CVN they could use to reference on how to perform it.

[cat in the hat]

After reading about 50 threads on the Jmod on various sites, I may just get the thicker "Tuff plate" separator plate and drill it out myself. I should be able to have the shop swap it out and leave the springs alone. I think that will accomplish 95% of the original purpose.

[4Eyedturd]

88grandmarq sells the jmod parts