Fuel Pump for Eaton Swap

[MTBSully]

What is everyone running for a fuel pump for an eaton swap? AEM 340? Which part number? Should I also get a BAP?

Thanks!

[loud2004marquis]

I'm runnin' a gt-40 pump and a kenne bell BAP.

[03Merc]

Aeromotive 340 with the KB boost a pump.


Sent from my iPhone using Tapatalk Pro

[MTBSully]

Anyone have a part number? Just to make sure I get one that will drop into the stock hat

[03Merc]

Anyone have a part number? Just to make sure I get one that will drop into the stock hat

11542 for AeroMotive.


Sent from my iPhone using Tapatalk Pro

[BackNBlack]

I'm runnin' a gt-40 pump and a kenne bell BAP.

Same as above...

[RocsMerc]

I'm running the Aeromotive 340 without a Boost-A-Pump, but I'm capped out at a little over 420HP at the wheels. If I wanted to go more, I'd need the Boost-A-Pump.

Edit: I just looked up the exact part number I used. Aeromotive Stealth 11142

[musclemerc]

To the guys running Aeromotive340s, these pumps are high draw and are NOT designed to work in parallel with a KB BAP. The Mfg states it on their site

OP I run dual GT supercar pumps and I have a dual BAP but its in the off position. The GT pumps move plenty fuel

[NATEHAWK]

Im running dual Aeromotive 340lp pumps with dual FPDM's, upgraded wiring from the hat to the FPDM, separate power with a relay to trigger. I still have the Boost A pump there however its turn all the way down.

[MTBSully]

I got the AEM 340 and a KB BAP ready to go in. I guess we will see if I need both or not. Definitely putting the pump in!