warren
07-08-2004, 04:46 PM
Had my first Dyno at Dyno Labs, in San Ramon, CA.
Mine is a 03MM with Denso's, 180stat. & an early DR chip.
Boy does it sound sweet at WOT!
HP = 256.51 TQ = 290.21 SAE corrected
89.02F, 29.39 in-Hg, 3RD GEAR WOT :up:
DynoJet has some customer software, however it is not very complete.
I will get the complete program so I can post the whole chart with
the A/F Ratio, HP, and TQ.
I am adding on something so I wanted a base line before doing so.
WarrenB
Mine is a 03MM with Denso's, 180stat. & an early DR chip.
Boy does it sound sweet at WOT!
HP = 256.51 TQ = 290.21 SAE corrected
89.02F, 29.39 in-Hg, 3RD GEAR WOT :up:
DynoJet has some customer software, however it is not very complete.
I will get the complete program so I can post the whole chart with
the A/F Ratio, HP, and TQ.
I am adding on something so I wanted a base line before doing so.
WarrenB