View Full Version : Tranny Trouble
MMManic
07-14-2004, 05:43 AM
My '03 MM with 2200 miles lost 3rd gear and overdrive. The overdrive light on the dash flashes on and off, the Check Engine light is on and I read code 0755 "Shift Solenoid B Malfunction". Anybody have any suggestions on anything I can check before having the dealer tear into the tranny?
Thanks,
MMManic
RoyLPita
07-14-2004, 05:48 AM
Just take it (or tow it) in. No questions asked.
Logan
07-14-2004, 05:56 AM
A shift solenoid going bye bye would certainly explain it... :) Just take it in, they'll be able to fix it without issue.
RF Overlord
07-14-2004, 06:41 AM
code 0755 "Shift Solenoid B Malfunction". Anybody have any suggestions on anything I can check before having the dealer tear into the tranny?
Manic:
One thing you can try first is to unplug and re-seat the electrical connectors on the side of the trans...
I don't have the manual in front of me, but I believe there are 2 shift solenoids, both of which are easily accessible by removing the pan, so hopefully it won't be a major deal either way.
MMManic
07-14-2004, 07:23 AM
Manic:
One thing you can try first is to unplug and re-seat the electrical connectors on the side of the trans...
I don't have the manual in front of me, but I believe there are 2 shift solenoids, both of which are easily accessible by removing the pan, so hopefully it won't be a major deal either way.
Thanks for the suggestion and encouragement!
Bill
Don't try to play with it. Just have the dealer repair the Tranny. I had the same problem a couple of months ago. I was in and out of the shop within a couple of days. Remember to restore to factory settings before you take the car in if you are modified. :pimp:
Oh...transmissions....
I thought this was a thread about the story I heard of Marty's trip to Amsterdam....:D ;) :P
JohnE
07-14-2004, 10:00 AM
Have it fixed under warranty. The connectors wouldn't have come loose, unless you unplugged them recently. I'd say there's a strong chance that the famous C-Clip came off and allowed the Mechanical Diode to come out of place. That clip is only rated for 6,000rpm shaft speed.
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.