14" KVR Front Brake kit

[Dennis Reinhart]

Here is the KVR front brake kit that KVR has made for our cars, this a two piece directional rotor with aluminum hats in either cross drilled or gas slotted, the hats come in Black Red Blue or Silver.
This is a complete kit with braided steel lines fully loaded twin piston aluminum caliper with Carbon fiber pads and brake fluid


http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1091913558-sideview.jpg

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1091913716-finished.jpg

This is a very good kit, there is no delays in waiting on these kits and you do not have the issues that a lot of Bear kit owners have such as warped Rotors.

Install Pictures. The kit is easy to install its a complete bolt on with the stainless steel lines. After placing the car on a lift or jack stands you remove the OEM caliper and caliper mounting bracket, next remove the OEM rotor, you drill out the three aluminum pop rivets and remove the dust shield.

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1091914115-dustshield.jpg


You then install the KVR caliper mounting bracket I leave the OEM caliper installed till I have the kit in that way you don't lose all your brake fluid and have a mess.

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1091914414-mntbrkt.jpg

Next you mount the KVR rotor http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1091914577-14rotor.jpg

Then install the Loaded caliper, I had mine painted red they come in black.
http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1091915204-caliper.jpg

Next I remove the OEM caliper and brake line install the new KVR Braided steel lines in the exact location of the OEM line KVR's kit comes with a new mounting Bracket.

The optional rear brake line is a breeze to also install, after that just bleed the brakes and your done, this kit makes a worl of difference.

http://www.marauder57.com/Reinhart%20SC%20Banner%201.gif

[Krytin]

Very nice Dennis! A shame I already did the mini upgrade to SP drilled & slotted OEM size rotors! Oh well - the way I drive I'll need new pads & rotors by the end of next summer!

[gonzo50]

Here is the KVR front brake kit that KVR has made for our cars, this a two piece directional rotor with aluminum hats in either cross drilled or gas slotted, the hats come in Black, Red, Blue or Silver.
This is a complete kit with braided steel lines fully loaded twin piston aluminum caliper with Carbon fiber pads and brake fluid

This is a very good kit, there is no delays in waiting on these kits and you do not have the issues that a lot of Bear kit owners have such as warped Rotors.

Dennis, the kit looks awesome, :up: are the gas slotted ones the same as the cross drilled ones....as in the location of the slots in reference to the drilled ones ? :confused:

Do the new 14" front rotors match the existing rear rotors from KVR ?

I would like to see the silver color hat to see how it blends in with the black Marauder. :bandit:
Do you also provide the option of painting the calipers for your customers if requested, both front & rear ? :bows:

Are the rotors coated so they don't rust ?

Any prices at this time, I am very interested at this time. :rasta: Thanks.

[Dennis Reinhart]

Dennis, the kit looks awesome, :up: are the gas slotted ones the same as the cross drilled ones....as in the location of the slots in reference to the drilled ones ? :confused:

Do the new 14" front rotors match the existing rear rotors from KVR ?

The rear rotors are cross drilled and have carbon fiber pads

I would like to see the silver color hat to see how it blends in with the black Marauder. :bandit:
Do you also provide the option of painting the calipers for your customers if requested, both front & rear ? :bows:

Are the rotors coated so they don't rust ?

The rotors are two pieced with Aluminum hats they will not rust

Any prices at this time, I am very interested at this time. :rasta: Thanks.

Call me Monday I will go over pricing with you