PDA

View Full Version : Stock Mercury Marauder alignment specs?



Tailgate
01-17-2003, 09:17 PM
Hi. This is Tailgate from CrownVic.net. I'm trying to find out stock front end alignment specs of Mercury Marauder. Thus far I had luck finding this info on Kenny Brown and Bondurant panthers:

Bondurant Crown Victoria Police Interceptor
Camber 1.8 degrees negative
Caster 7.0 degrees positive
Toe 0.0 degrees

Kenny Brown Panther, P1, P2, and G man
Camber = -0.5
Caster = +6.0
Toe = 0

http://www.crownvic.net/ubbthreads/showflat.php?Cat=&Board=UBB23&Number=152183&page=0&view=collapsed&sb=5&o=&fpart=1#Post152345

What are the alignment specs for Mercury Marauder?

looking97233
01-20-2003, 03:19 PM
I don't know the specs. but consider this: 2003 got a complete redesign of the front suspension and the back got the shocks moved outboard. So, if the specs. you have listed above are for a 2002 or eariler, you may be comparing apples to lemons.

Leadfoot
01-21-2003, 03:07 PM
Caster 5.8
Camber -0.5
Total Toe -0.15 (early MMs were at -0.12)

LincMercLover
01-21-2003, 03:15 PM
Wow... I was going to say straight...