Wheel Locks

[jakdad]

What size or type wheel locks do we use on Marauders? Wheel stud and nut size?? Lots of questions.
:drive: :cloud9:

[Marauder8]

McGard makes wheel locks for all vehicles. I believe our studs are 1/2-20.
Go to web site and you and choose from vehicle list.

[jakdad]

McGard makes wheel locks for all vehicles. I believe our studs are 1/2-20.
Go to web site and you and choose from vehicle list.
I did that and couldn't find anything Marauder specific. I thought we had metric studs. My 2000 Lightning has 14mm studs but the 99s have a smaller metric size. Never know with aluminum and steel wheels available for the Grand Marquis.

[gdmjoe]

jakdad - I did that and couldn't find anything Marauder specific. I thought we had metric studs. My 2000 Lightning has 14mm studs but the 99s have a smaller metric size. Never know with aluminum and steel wheels available for the Grand Marquis.
Use either the Mercury Grand Marquis -or- Ford Crown Victoria as your search criteria. *Either are the old 1/2"-20.

BTW ... they're also available from the dealership parts counter.

[Marauder8]

I went and checked and 1/2-20 is thread size. I bought a complete set of Spline lug nuts and locks for my MM. Cost around $90.00. But you can just get the locks also.

[ZZMarauder]

McGard 24194 wheel locks work well for the Marauder. They are slightly shorter than than the existing lugs so look like they are made for the car.

[BruteForce]

I bought the Gorilla locking lug system from Summit racing. 32.99 shipped

link to part (http://store.summitracing.com/default.asp?target=esearch.asp&N=100&Ntk=PartSearch&Ntt=GOR-71683N&x=13&y=3)

[jgc61sr2002]

McGard wheel locks for the Marauder are the same as a late model GM or CV. I used the ones from my 2000 GM. You can get them from Ray the Dealer a supporting vendor of this site.