PDA

View Full Version : Pro Charger Blower on the way


maraudernkc
10-13-2004, 04:27 PM
My best friend owns Pro Charger here in Kansas City so I am going to put a Pro Charger blower on my car. I will use the 99 Cobra kit since Pro Charger does not make one for the MM. It will use a two core intercooler instaed of the 3 core that comes on the 99 Cobra because of space. I will use 42lb injectors and a in the tank SVT Ford Foucus feul pump that pumps out 300 LPH. I am only going to run 6 puonds of boost which will make 400 to 420HP at the rear wheel.
This will be a blow thru system. I will submit pics when I get it done.

Take care, Greg
:flamer:
MARAUDER S/C #5
10-13-2004, 04:47 PM
My best friend owns Pro Charger here in Kansas City so I am going to put a Pro Charger blower on my car. I will use the 99 Cobra kit since Pro Charger does not make one roe the MM. It will use a two core intercooler instaed of the 3 core that comes on the 99 Cobra because of space. I will use 42lb injectors and a in take SVT Ford Foucus feul pump that pumps out 300 LPH. I am only going to run 6 puonds of boost which will make 400 to 420HP at the rear wheel.
This will be a blow thru system. I will submit pics when I get it done.

Take care, Greg
:flamer:Sounds great, good luck! :up:
Tallboy
10-13-2004, 04:49 PM
can't wait to see/hear about the results!!!;)
SergntMac
10-13-2004, 04:53 PM
Sounds great, good luck! :up:
Ditto this...

Sounds like you have done some homework here, and I'm very interested to see a second opinion on "blow through" applications.

Please keep us posted?
maraudernkc
10-13-2004, 05:01 PM
I will do a dyno run and submit with pics when done.




Ditto this...

Sounds like you have done some homework here, and I'm very interested to see a second opinion on "blow through" applications.

Please keep us posted?
maraudernkc
10-13-2004, 05:03 PM
There is a guy in MI. that installs this kit but it's like 8K installed. I think it's Pande Performamce. Has anyone heard of them?
FiveO
10-13-2004, 05:07 PM
I think Pande's used to be a supporting vendor here.

I've heard of them.....not sure on what type of work they do... IE: Quality.
SergntMac
10-13-2004, 05:32 PM
"Pande" is a performance race car shop who was once a vendor here. Pande is not with us anymore, but his chief wrench, and the man behind Pande's MM/Pro Charger exploration, is "BBockstanz," who is still one of our brothers here.

If you need to know more about a ProCharger install, and it's problems, page Brad Bockstanz here, or, drop me a line at SergntMac@aol.com and I'll FWD his contact numbers.

I'm hopeful that this ProCharger project will develop more MM options, I'm really tired of the "Vortech vs. Eaton" stuff.
Zack
10-13-2004, 05:55 PM
This will be a blow thru system.

Well Im sorry to hear this, but I am interested in the project and hope you keep us updated.
Warpath
10-13-2004, 05:55 PM
The 99 Procharger system mounts to the right side of the engine, correct?. I'm interested in seeing how you modify it to work on an MM. BTW, the Cobra kit comes with either a 2 or 3 core I/C depending on how much boost you run (according to their website).
maraudernkc
10-14-2004, 01:36 PM
Sarg, can you email me Brad's number?
greg@msg-llc.com

Thanks, Greg


"Pande" is a performance race car shop who was once a vendor here. Pande is not with us anymore, but his chief wrench, and the man behind Pande's MM/Pro Charger exploration, is "BBockstanz," who is still one of our brothers here.

If you need to know more about a ProCharger install, and it's problems, page Brad Bockstanz here, or, drop me a line at SergntMac@aol.com and I'll FWD his contact numbers.

I'm hopeful that this ProCharger project will develop more MM options, I'm really tired of the "Vortech vs. Eaton" stuff.
Deebar
10-14-2004, 02:38 PM
Check Your Pm's