Keystone Good Hoods

[Donny Carlson]

I've contacted this company about the possibility of their making a ram air or rear induction hood for the Marauder. Cross your fingers that they show interest. It won't be cheap -- their hoods are in the 800$ plus range... but are functional.

http://www.keystonerestyling.com/

http://www.keystonerestyling.com/datacat/uploads/GHF105bg.jpg


This is a functional cowl induction hood for an F-150 that has a recessed instrument pod, holding two, 2-1/16" gauges of your choice.
http://www.keystonerestyling.com/datacat/uploads/GHF103bg.jpg

This is a functional "cobra" stule dual scoop hood, which can be fitted for ram air induction.

http://www.keystonerestyling.com/datacat/uploads/GHF100bg.jpg

A dual scoop hood that also can be made into a functional ram air system.



http://www.keystonerestyling.com/assets/ramair_01.gifhttp://www.keystonerestyling.com/assets/ramair_02.gifhttp://www.keystonerestyling.com/assets/ramair_03.gif<TABLE cellSpacing=0 cellPadding=0 width=587 border=0><TBODY><TR vAlign=top><TD width=189>Cold outside air enters the Good Hood...</TD><TD width=9> </TD><TD width=192>Air flows through the hood's internal ductwork... </TD><TD width=10> </TD><TD width=187>Forced air is directed to the ram-air box and into the engine. </TD></TR></TBODY></TABLE><TABLE cellSpacing=0 cellPadding=0 width=587 border=0><TBODY><TR vAlign=top><TD width=189></TD><TD width=9> </TD><TD width=192></TD><TD width=10> </TD><TD width=187> </TD></TR></TBODY></TABLE><TABLE cellSpacing=0 cellPadding=0 width=587 border=0><TBODY><TR vAlign=top><TD width=189></TD><TD width=9></TD><TD width=192> </TD><TD width=10></TD><TD width=187></TD></TR></TBODY></TABLE>

[BruteForce]

That cowl induction hood looks promising. I think it would look good with our acre and a half of hood. :cool:

[Patrick]

Maybe we can finally get one!

[bigslim]

Nice work Donny! :up:

[tmac1337]

Looks good Donny? Hope they make one. Would definately be interested.

check out this link, design your own hood.

http://www.domesticperformance.com/product_info.php?products_id=4 1&osCsid=14f0ee0d3353f145dfdabe7 4a2f94a67

[Hack Goby]

http://home.comcast.net/~hack_goby/fxfdyt.JPG Useing NAVCHAP`S fine Marauder as a example I would like to see something like this with a working cowl on the drivers side.

[the_pack_rat]

Ya' know ...

If someone said to me they were gonna stripe their MM ...

I wouldn't have been all that impressed.

But I gotta tell ya ...

I've seen pics of this car before & don't recall commenting on it ... but I will certainly comment now ...

That car looks pretty damn PHAT !!!.

:2thumbs:

[teamrope]

Ya' know ...

If someone said to me they were gonna stripe their MM ...

I wouldn't have been all that impressed.

But I gotta tell ya ...

I've seen pics of this car before & don't recall commenting on it ... but I will certainly comment now ...

That car looks pretty damn PHAT !!!.

:2thumbs:
And even better in person. :)

[Bowman9]

And don't forget to tell them that the hood would fit Crown Vics and Grand Marquis also. Sometimes manufactures get scared off on limited production vehicles.


I've contacted this company about the possibility of their making a ram air or rear induction hood for the Marauder. Cross your fingers that they show interest. It won't be cheap -- their hoods are in the 800$ plus range... but are functional.

http://www.keystonerestyling.com/

[FordNut]

So would this be a lightweight fiberglass hood? I might go for it if it saves weight, even though it does take a little away from the "sleeper" look.

[Bowman9]

I found this on Car Domain.

IMHO the scoop is too small for the car and for the wing...let's not go there.

http://www.cardomain.com/memberpage/612638

[Zim Hosein]

Hack Goby, what did you use to color in that PIC, MS Paint? :P


and for the wing...let's not go there.
:run:

[Hack Goby]

I used PhotoImpression

[Bowman9]

Hack Goby, How about this quick photoshop image?

http://www.mercurygallery.net/mmnet/data/500/787vent.jpg


http://home.comcast.net/~hack_goby/fxfdyt.JPG Useing NAVCHAP`S fine Marauder as a example I would like to see something like this with a working cowl on the drivers side.