Thank you 2003 MIB

[MAD-3R]

Thank you for the gift. It is very kind, and far more then needed.

Now, how do I put it on?

[CRUZTAKER]

Thank you for the gift. It is very kind, and far more then needed.

Now, how do I put it on?
One leg at a time....:dunno:

:D

[TripleTransAm]

Thank you for the gift. It is very kind, and far more then needed.

Now, how do I put it on?


Make sure you squeeze all the air out of the tip, and roll it down evenly and snugly.

Now, the real question is: how many do you consider 'far more than needed'?

[Patrick]

I hope we get the reel answer soon. Dan please get here before.......you know!!!

[Logan]

Well, after you've finished the contents, you screw the peanut butter lid onto your Intake tube and start doing an Elvis style Jig in the parkin' lot whilst eating a banana.

:up:

[MAD-3R]

Well, after you've finished the contents, you screw the peanut butter lid onto your Intake tube and start doing an Elvis style Jig in the parkin' lot whilst eating a banana.

:up:

Thanks all.
Now then, does the Banana have to be fried?

[2003 MIB]

Good stuff boys :P but maybe we ought to help him with the intake spacer installation.
Here's what I did (right or wrong):
Remove the old intake by looosening the bolts in a star pattern. When it is loose- remove the bolts and leave the gasket on the lower manifold-slide the spacer and top gasket between the manifold halves. Tighten the bolts in a star pattern- I know there's another sequence specified in the gallery (carfixer-THANKS!) but I did this before it was posted. DON'T go nuts torquing the bolts- you'll pull the aluminum threads out. It took me about half an hour but some of that was hunting a dropped socket.

[2003 MIB]

If it seems hazy, Bring it early to the club meeting on the 13th and we'll install it in the John Eagle parking lot as a clinic for the other local owners.

[CRUZTAKER]

That's how I did it MIB...;)

[2003 MIB]

That's how I did it MIB...;)
Hmmmm- hard to argue with Barry's kind of success, ain't it?:bows: :bows: