PDA

View Full Version : Kinsler Fuel filter install pictures



Dennis Reinhart
01-01-2005, 11:11 AM
Here are the pictures of the Kinsler fuel filter installed on the car several members have asked for this.

You first remove the old filter and 90 degree bends clean off the steel lines install the compression fittings and lines install the high flow Kinsler filter and it fits in the OEM bracket. Check for leaks.

http://web.iwebcenters.com/reinhartautomotive/images/filter--lines.jpg

http://web.iwebcenters.com/reinhartautomotive/images/prep-lines.jpg

http://web.iwebcenters.com/reinhartautomotive/images/prep-lines1.jpg

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1104602288-filterinstalled.jpg

Kinsler with a dash 8 line

http://web.iwebcenters.com/reinhartautomotive/images/session/00-00-1104604125-kinslerwithdash8line.JPG

BruteForce
01-01-2005, 11:33 AM
I have this mod. Its a keeper! :up: :rock:

SergntMac
01-01-2005, 12:38 PM
Ditto...Just finished a dyno tune with Lidio, and his live diagnostics revealed that my Walbro 255 fuel pump, with this filter mod, is quite healthy throughout the power band. Whew! I was afraid I was going to have to upgrade to the Focus pumps, and the budget is on the trim side after building an engine. I don't think this would have been the case if I was still using the OEM filter and those 90 degree bends.

jvillerauder
12-17-2008, 06:20 PM
dude i must come to your shop for i know you have alot of products im interested in i just need the address/directions and a good time to come by thanks

ImpalaSlayer
12-17-2008, 06:27 PM
bout 3 years late..........

Blackened300a
12-17-2008, 06:46 PM
I thought this was a new featured item. But no! Another thread back from the dead.

O's Fan Rich
12-17-2008, 09:07 PM
http://upload.wikimedia.org/wikipedia/commons/b/bd/Vasnetsov_Grave_digger.JPG

ctrlraven
12-18-2008, 07:35 AM
I didn't even realize this was almost 4 years old now lol.

Dennis Reinhart
12-18-2008, 11:43 AM
dude i must come to your shop for i know you have alot of products im interested in i just need the address/directions and a good time to come by thanks


I am here every including Saturdays

stryker
12-22-2008, 11:56 PM
Sorry but ¿ Which is the difference between OEM fuel filter to this Kinsler fuel filter ?

STRYKER. :burnout:

Blackened300a
12-23-2008, 05:53 AM
Sorry but ¿ Which is the difference between OEM fuel filter to this Kinsler fuel filter ?

STRYKER. :burnout:

About $235.

Dennis Reinhart
12-23-2008, 09:09 AM
Actually it is not nearly this much, we now use the kinsler turbo blue, the older kinsler flowed more fuel than the OEM filter and it did away with the 90 degree fittings, I will post some pictures later on.

ctrlraven
12-24-2008, 08:27 AM
Or could just do the CHEAP way of getting rid of the 90 degree fittings and throw in a F-150 fuel filter.

fastblackmerc
12-24-2008, 08:42 AM
Or could just do the CHEAP way of getting rid of the 90 degree fittings and throw in a F-150 fuel filter.

How do you get rid of the other 8 90% fittings?