Billit interior dressup ???

[Bowman9]

I know that someone on this site was dressing up under the hood with some billit accessories, but has anyone found any billit accessories for our interiors?
I have looked through mustang magizines and seen billit window, light, and door switches for mustangs and rangers but does anyone know if there is a kit that will work on Marauders/Crown Vics?
Also does anyone know of interior billit door handels? I sometimes think I am going to break the stock plastic ones getting out of the car.

[Donny Carlson]

I know that someone on this site was dressing up under the hood with some billit accessories, but has anyone found any billit accessories for our interiors?
I have looked through mustang magizines and seen billit window, light, and door switches for mustangs and rangers but does anyone know if there is a kit that will work on Marauders/Crown Vics?
Also does anyone know of interior billit door handels? I sometimes think I am going to break the stock plastic ones getting out of the car.
There are a limited number of billit interior accesories that work in our car. I replaced the plastic door lock pins with machined billit door lock pins. These come in a variety of designs, I selected this one because it looked good and was easy to grab hold of:

http://www.mercurygallery.net/mmnet/data/502/1136DSC00519.JPG

These come in a polished version, too, and you can also replace the plastic ring that surrounds the pin with a billit ring. I think Marty ordered thiese in the polished version with the rings.

That said, I am considering changing the fronts to a billit pin that is more like the OEM pin design, because when locked it sits so low in the door it doesn't poke into your elbow if you lay your arm up next to the window, like these pins do. Though I must admit, I've gotten used to the pin.

These can be purchased from UPR products and Steeda, though the rings are exclusive to UPR.

I also bought a "lighter delete" plug to replace the cigarette lighter, which was relocated to the side of the console with my third gauge mod. Steeda has a nice "12volts" one offered for the 2005 Mustang which will work. Some people have also replaced the plastic cigarette lighter with a billit lighter

http://www.mercurygallery.net/mmnet/data/502/1136DSC00763.JPG

Other interior parts I am not sure about. There's a billit coat hanger that should work, and I think the cover for the mutifunction switch will work. I think the tilt lever will work. The light switch covers won't work.

[martyo]

^^^ They don't call him Donny Billit for nothin'!!

[fastblackmerc]

^^^ They don't call him Donny Billit for nothin'!!
There is also billet door sills.

[Donny Carlson]

There is also billet door sills.
Yeah, I forgot about those:

http://www.mercurygallery.net/mmnet/data/502/1136DSC00484.JPG

And of course the billit pedal covers.

[fastblackmerc]

Yeah, I forgot about those:

http://www.mercurygallery.net/mmnet/data/502/1136DSC00484.JPG

And of course the billit pedal covers.
They look SWEEEEEEEEEEEEEEEEEEEEEEET!!!! !!
Don't forget the MARAUDER pedal covers......