Who makes us a cat-back?

[ROADWARRIORSVT]

Not that I'm going to get one today,....BUT,.....eventually I'd like a little rumble. Only looking for a cat-back. I'm only in it for the sound, not extra power. Thanks.

[Marauderjack]

Nobody to my knowledge?? :(

You will have to fabricate it and most muffler shops use cheap tailpipe material that will rot out in a year or so....JUST PAST THE WARRANTY!!! :censor:

You may want to just change out the mufflers or install electric "Cut-Outs" as one member did?? :rolleyes:

I like the stock exhaust tone and don't want the dreaded "Cabin Drone" most after market stuff gives!! :mad:

Good Luck!

Marauderjack :)

[jakdad]

I went into the Bassani site and didn't find anything for the Marauder. I have Bassani on our Lightning and really like it. Maybe later they'll make one.

[CRUZTAKER]

If it's just rumble you are after. Start with the Meg's delete tips available through Wes Chain here on this board.

Also, a set of Magnaflow mufflers (or manufacturer of your choice), will definately change the sound. Particularly in conjunction with delete tips.

[ROADWARRIORSVT]

Maybe I'll just cut off the stock mufflers and put on some Magnaflows.Looks like I'll get to use my welder again! :cool:

[BlackHole]

I went into the Bassani site and didn't find anything for the Marauder. I have Bassani on our Lightning and really like it. Maybe later they'll make one.


Yes they do the Midlength 03/04 Cobra Headers but you also have to get the X pipe. Just got them both 2 days ago

[BlackHole]

Heres a few pics.

[jakdad]

Heres a few pics. So, is the cat-back available for Marauder?

[BlackHole]

So, is the cat-back available for Marauder?


No but the Midpipes and Xpipe will fit though and thats what I got from Lightningforceperformance.com As 2 Mach I's have this current set up and they do sound nice.

[FordNut]

If you want a bolt-on cat-back system the only thing out there is the Borla CV system. Otherwise it's either custom or the DR/Kooks systems.

[DEFYANT]

Maybe I'll just cut off the stock mufflers and put on some Magnaflows.Looks like I'll get to use my welder again! :cool:
I think there is a set on ebay.

[Directedby]

Not that I'm going to get one today,....BUT,.....eventually I'd like a little rumble. Only looking for a cat-back. I'm only in it for the sound, not extra power. Thanks.

Cat back is very simple to make. Buy whatever mufflers you want - i got the Flowmaster 50's - they cost $125 each installed.

Then buy the Magnaflow X-pipe - i paid $45.

Then go to exhaust shop and have them weld it all together with 2.5 " pipe.

Here are pics of my Cat-back system - Cost me $450 all in.

http://www.mercurygallery.net/mmnet/data/500/437exhaust2-med.jpeg

http://www.mercurygallery.net/mmnet/data/500/437exhaust-med.jpeg

[rayjay]

Heres a few pics.
Keep us informed on how this turns out.

[ROADWARRIORSVT]

Directedby,
Looks good, like it was meant to be! I'll check into that!

[DEFYANT]

Cat back is very simple to make. Buy whatever mufflers you want - i got the Flowmaster 50's - they cost $125 each installed.

Then buy the Magnaflow X-pipe - i paid $45.

Then go to exhaust shop and have them weld it all together with 2.5 " pipe.

Here are pics of my Cat-back system - Cost me $450 all in.

http://www.mercurygallery.net/mmnet/data/500/437exhaust2-med.jpeg

http://www.mercurygallery.net/mmnet/data/500/437exhaust-med.jpeg
Nice!!! Is the x-pipe MM specific? Or modded to fit?

[Directedby]

Nice!!! Is the x-pipe MM specific? Or modded to fit?

X-pipe is universal.